|
Mechanical Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
ME-101 |
Advanced Gas Turbine Mechanical Maintenance and Troubleshooting |
|
|
ME-102 |
Advanced Heating, Ventilating and Air Conditioning (HVAC) |
|
|
ME-103 |
Advanced Mechanical Seals Maintenance and Troubleshooting |
|
|
ME-104 |
Advanced Pumps, Compressors and Turbine Troubleshooting and Maintenance |
|
|
ME-105 |
Advanced Pumps Maintenance and Troubleshooting |
|
|
ME-107 |
Advanced Steam Turbines: Design, Operation and Maintenance |
|
|
ME-108 |
Advanced Technology of Pipeline Design, Construction and Mechanical Integrity |
|
|
ME-109 |
Advanced Valve Technology: Design, Selection, Installation, Applications, Sizing, Inspection and Maintenance |
|
|
ME-110 |
Air Conditioning and Refrigerating Technology |
|
|
ME-111 |
Troubleshooting of Rotating Machinery |
|
|
ME-116 |
Applied Heat Transfer Engineering |
|
|
ME-117 |
Operation and Theory of Steam and Gas Turbines, Co-Generation and Combined Cycle Plants |
|
|
ME-118 |
Bearing and Bearing Failure Analysis |
|
|
ME-119 |
Bearing Installation, Maintenance, Troubleshooting and Failure Analysis |
|
|
ME-120 |
Bearing, Lubrication and Gear Boxes |
|
|
ME-121 |
Belt Conveyers: Operation and Maintenance |
|
|
ME-122 |
Blowers and Compressors: Operation, Maintenance and Troubleshooting |
|
|
ME-123 |
Blowers, Compressors and Pumps Technology |
|
|
ME-124 |
Boiler Operation and Maintenance |
|
|
ME-125 |
Boiler Operation, Maintenance, Inspection, Safety and Water Treatment Technology |
|
|
ME-126 |
Caterpillar Engine |
|
|
ME-127 |
Centrifugal Compressor and Steam Turbine Design, Operation and Maintenance |
|
|
ME-128 |
Centrifugal Compressor Maintenance, Major Inspection and Overhauling |
|
|
ME-129 |
Centrifugal Compressor: Operation and Maintenance |
|
|
ME-130 |
Centrifugal Compressor Theory and Troubleshooting (Dresser Rand) |
|
|
ME-131 |
Centrifugal Compressor Operation |
|
|
ME-132 |
Centrifugal Gas Compressor Seal Maintenance (Wet and Dry) |
|
|
ME-132 |
Centrifugal Pumps |
|
|
ME-133 |
Centrifugal Pumps: Operation, Maintenance and Troubleshooting |
|
|
ME-134 |
Centrifugal Pumps: Principles and Operations |
|
|
ME-135 |
Centrifugal Pumps Troubleshooting |
|
|
ME-137 |
Combustion Techniques |
|
|
ME-138 |
Commissioning and Start-up of Boilers |
|
|
ME-139 |
Compressors and Steam Turbine Technology, Design, Operation and Maintenance |
|
|
ME-140 |
Compressors Major Inspection and Overhauling |
|
|
ME-141 |
Compressors, Pumps, Motors, and Variable-Speed Drives: Selection, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting, and Maintenance |
|
|
ME-142 |
Compressors System Design, Selection, Installation, Operation and Troubleshooting |
|
|
ME-144 |
Compressors Troubleshooting and Fault Diagnosis |
|
|
ME-149 |
Design, Analysis and Fabrication of Pressure Vessels |
|
|
ME-150 |
Design and Fabrication of Storage Tanks in Accordance with API 650 |
|
|
ME-151 |
Design Ventilation Systems |
|
|
ME-152 |
Diesel Engine: Designs, Installation, Operations, Troubleshooting and Maintenance |
|
|
ME-153 |
Diesel Engine Maintenance |
|
|
ME-154 |
Dry Gas Seal Maintenance |
|
|
ME-157 |
Failure Diagnosis of Rotating Machinery |
|
|
ME-158 |
Fans and Application in Power Plant |
|
|
ME-159 |
Fasteners |
|
|
ME-161 |
Fluid Mechanics |
|
|
ME-162 |
Fuel and Combustion |
|
|
ME-163 |
Fuel Systems of GE Gas Turbine Units |
|
|
ME-164 |
Fundamentals of Machinery Lubrication |
|
|
ME-166 |
Fundamentals of Piping System for Engineers |
|
|
ME-167 |
Fundamentals of Storage Tanks |
|
|
ME-168 |
Fundamentals of Thermodynamics |
|
|
ME-169 |
Fundamentals of Vibration Causes, Effects, Analysis and Prevention Techniques |
|
|
ME-170 |
Fundamentals/Overview of Pumps and Compressors in Oil and Gas Facilities |
|
|
ME-171 |
Gas and Air Compressors - Centrifugal and Axial Compressors |
|
|
ME-172 |
Gas and Air Compressors - Positive Displacement |
|
|
ME-173 |
Gas Turbine Frame 5 And 6 Operation, Maintenance and Inspection |
|
|
ME-174 |
Gas Turbine Generator: Operation and Maintenance |
|
|
ME-175 |
Gas Turbine Liquid Fuel System |
|
|
ME-176 |
Gas Turbines: Design, Selection, Operation, Inspection, Troubleshooting and Maintenance |
|
|
ME-177 |
Gas Turbine Technology and Protection |
|
|
ME-178 |
Gaskets, Packing and Mechanical Seals |
|
|
ME-179 |
Gear Boxes and Dynamic Balance |
|
|
ME-180 |
Gear Boxes, Bearings, Lubrication and Mechanical Seals |
|
|
ME-181 |
Gear Boxes: Selection, Inspection, Maintenance, Troubleshooting and Repair |
|
|
ME-182 |
GE Turbine Operations and Inspection |
|
|
ME-183 |
Hand Tools and Power Tools |
|
|
ME-184 |
Heat Exchangers: Design, Specification, Operation, Maintenance and Troubleshooting |
|
|
ME-185 |
Heat Recovery Steam Generation (HRSG) |
|
|
ME-186 |
Heat Treatment |
|
|
ME-187 |
Heating, Ventilation and Cooling Systems for Engineers |
|
|
ME-189 |
Hydraulic and Pneumatic Maintenance and Troubleshooting |
|
|
ME-190 |
Industrial Equipment: Compressors, Pumps, Motors and Variable-Speed Drives: Selection, Sizing and Application |
|
|
ME-191 |
Instrument Air System and Pneumatic Systems |
|
|
ME-192 |
Internal Combustion Engine (Diesel Engines and Gas Engines) Theory and Troubleshooting |
|
|
ME-193 |
Interpretation of Engineering Drawings |
|
|
ME-194 |
Lube Oil System Design and Troubleshooting |
|
|
ME-195 |
Lubrication, Wear and Friction |
|
|
ME-196 |
Machine Elements: Bearings and Lubrication |
|
|
ME-197 |
Machine Elements: Coupling and Hydraulic Converters |
|
|
ME-198 |
Machinery Alignment and Balancing |
|
|
ME-199 |
Machinery Bearing, Lubrication and Reliability |
|
|
ME-200 |
Machinery Failure Analysis and Prevention |
|
|
ME-201 |
Machinery Failure, Vibration Analysis and Predictive Maintenance |
|
|
ME-202 |
Machinery Vibration Analysis for Beginners and Intermediates |
|
|
ME-203 |
Machinery Vibration and Predictive Analysis and Maintenance |
|
|
ME-204 |
Maintenance and Operation of Rotating Equipment |
|
|
ME-205 |
Material Selection and Heat Treatment |
|
|
ME-206 |
Metallurgy and Material Selection for Mechanical Engineers |
|
|
ME-207 |
Measuring Tools and Precision Measuring Tools |
|
|
ME-208 |
Mechanical Alignment/Shaft Alignment |
|
|
ME-209 |
Mechanical Drawings, Symbols and Documentation for Engineers |
|
|
ME-210 |
Mechanical Engineering for Non Mechanical Engineers |
|
|
ME-211 |
Mechanical Equipment: Compressors, Pumps, Seals, Motors and Variable Speed Drives |
|
|
ME-212 |
Mechanical Measurements |
|
|
ME-213 |
Mechanical Seals and Gland Packing |
|
|
ME-214 |
Mechanical Seals: Design, Application, Selection, Installation, Troubleshooting and Maintenance |
|
|
ME-215 |
Mechanical Seals and Dry Gas Seals |
|
|
ME-216 |
Mechanical Seals Maintenance |
|
|
ME-217 |
Mechanical Vibration Causes, Effect, Analysis and Prevention Techniques |
|
|
ME-218 |
Modern Heating, Ventilating and Air Conditioning (HVAC) Design, Installation, Operation, Maintenance and Troubleshooting Technology |
|
|
ME-219 |
Modern Valve Technology |
|
|
ME-220 |
Molecular Sieves and Adsorption |
|
|
ME-221 |
Operation, Maintenance and Failure Prevention of Plant Piping Systems |
|
|
ME-222 |
Operation, Maintenance and Troubleshooting of Pumps, Compressors and Valves |
|
|
ME-223 |
Overview of Pumps and Compressors in Oil and Gas Facilities |
|
|
ME-224 |
Pipeline Operations and Troubleshooting |
|
|
ME-225 |
Piping Flanges, Gaskets and Valves |
|
|
ME-226 |
Piping Systems Design, Troubleshooting and Maintenance |
|
|
ME-227 |
Piping Vibration Analysis |
|
|
ME-228 |
Plant Equipment Maintenance |
|
|
ME-229 |
Power Transmission Systems or Drives (Coupling, Belt Drive, Gears, Hydraulic Couplings) |
|
|
ME-230 |
Practical Boiler Plant Operation and Management for Engineers and Technicians |
|
|
ME-231 |
Practical Boiler Plant: Operation, Maintenance and Troubleshooting |
|
|
ME-232 |
Practical Hydraulic Systems: Operation and Troubleshooting |
|
|
ME-233 |
Practical Multi-Stage Pump OH |
|
|
ME-234 |
Practical Pneumatic Systems: Design, Operation, Control, Maintenance and Troubleshooting |
|
|
ME-235 |
Practical Pump and Valve Technology |
|
|
ME-236 |
Practical Pump Technology: Selection, Operation and Maintenance |
|
|
ME-237 |
Practical Valve Technology: Selection, Installation, Upgrading, Inspection and Troubleshooting |
|
|
ME-238 |
Pressure Relief Device Inspection (API-576) |
|
|
ME-239 |
Pressure Vessels Design |
|
|
ME-240 |
Prime Movers Operation Maintenance and Troubleshooting |
|
|
ME-241 |
Principles of Rotating Equipment |
|
|
ME-242 |
Process Equipment: Fired Heaters, Air Coolers, Heat Exchangers, Piping, Pumps, Compressors , Process Vessels, Fractionators Columns, Reactors and Loading Facilities: Selection, Sizing, Applications, Design, Operation, Troubleshooting and Maintenance |
|
|
ME-243 |
Process Piping and Piping Fundamentals, Pipes and Fittings |
|
|
ME-244 |
Process Piping Design (ASME B31.3) |
|
|
ME-245 |
Pumps and Compressors Design, Maintenance and Troubleshooting |
|
|
ME-246 |
Pumps And Compressors Maintenance |
|
|
ME-247 |
Pumps And Compressors: Preventive Diagnostics |
|
|
ME-248 |
Pumps and Pumping System Design, Installation, Operation and Troubleshooting |
|
|
ME-249 |
Pumps and Turbine Technology |
|
|
ME-250 |
Pumps (Centrifugal and Positive Displacement Pumps): Selection, Operation and Maintenance |
|
|
ME-251 |
Pumps, Compressors and Steam Turbines: Operations and Troubleshooting |
|
|
ME-252 |
Pumps Maintenance, Troubleshooting and Overhauling |
|
|
ME-253 |
Pumps Selection, Installation, Operation, Maintenance and Troubleshooting |
|
|
ME-254 |
Pumps, Valves And Diesel Engine Maintenance |
|
|
ME-256 |
Reciprocating Compressors: Operations, Maintenance and Troubleshooting |
|
|
ME-257 |
Reciprocating Compressors Overhauling |
|
|
ME-258 |
Reciprocating Compressors Theory and Troubleshooting |
|
|
ME-259 |
Reverse Engineering |
|
|
ME-260 |
Risk Based Inspection (RBI) API-580/581 |
|
|
ME-261 |
Root Cause Failure Analysis (RCFA) |
|
|
ME-262 |
Rotating Equipment Fundamentals |
|
|
ME-263 |
Rotating Equipment: Introduction to Gas Turbines, Pumps and Compressors Operations and Maintenance |
|
|
ME-264 |
Rotating Equipment Reliability Optimization and Continuous Improvement |
|
|
ME-265 |
Rotating Equipment, Selection, Operation, Maintenance and Inspection |
|
|
ME-266 |
Rotating Equipment Vibration and Monitoring |
|
|
ME-267 |
Rotating Machinery, Turbine and Compressor Control |
|
|
ME-268 |
Safety Relief Valve Inspection, Maintenance, Operation, Troubleshooting and Repair |
|
|
ME-269 |
Scheduled Oil Sampling |
|
|
ME-270 |
Screw Compressor Theory, Operation, Troubleshooting and Maintenance |
|
|
ME-271 |
Separators Selection, Operation and Maintenance |
|
|
ME-272 |
Solar Gas Turbine Operation and Maintenance |
|
|
ME-273 |
Static Equipment: Introduction to Valves, Pressure Vessels, Piping and Heat Exchangers |
|
|
ME-274 |
Steam Boilers Operation, Maintenance and Control Systems |
|
|
ME-275 |
Steam Trapping and Control |
|
|
ME-276 |
Steam Turbine Design, Operation and Maintenance |
|
|
ME-277 |
Steam Turbine Maintenance |
|
|
ME-278 |
Storage Tanks: Inspection, Maintenance, Operation, Troubleshooting and Repair |
|
|
ME-279 |
Tanks and Pressure Vessels - Basic Course |
|
|
ME-280 |
Tank and Tank Farms: Design, Operation, Measurement, Inspection and Maintenance |
|
|
ME-281 |
Troubleshooting of Engines, Pumps and Compressors |
|
|
ME-282 |
Turbine Major Inspection and Overhaul |
|
|
ME-283 |
Turbochargers: Working Principle, Troubleshooting and Maintenance |
|
|
ME-284 |
Turbo Expander and Liquid Expander: Operation, Performance, Maintenance and Troubleshooting |
|
|
ME-285 |
Turbo Machinery Monitoring and Problem Analysis |
|
|
ME-286 |
Utilities and Energy Systems Design and Performance in Refineries and Petrochemical Plants |
|
|
ME-287 |
Utilities Equipment; Steam Generators, Water Treatment and Storage Tanks |
|
|
ME-288 |
Valves Fundamentals |
|
|
ME-289 |
Valves Maintenance |
|
|
ME-290 |
Valves Technology Types, Maintenance, Troubleshooting, Operation and Applications |
|
|
ME-291 |
Valves, Valve Actuators and Valve Maintenance |
|
|
ME-292 |
Valves Types, Operation and Applications |
|
|
ME-293 |
Vibration Analysis and Condition Monitoring |
|
|
ME-294 |
Vibration Analysis for Conditioning Monitoring of Rotating Machinery |
|
|
ME-295 |
Vibration Analysis in Process Plants |
|
|
ME-296 |
Vibration Measurement |
|
|
ME-297 |
Machinery Failure Analysis and Troubleshooting |
|
|
ME-298 |
Centrifugal, Reciprocating and Screw Compressor |
|
|
ME-299 |
Pressure Relief Systems and Relief Valves |
|
|
ME-300 |
Turbo Expander: Operation, Performance, Maintenance and Troubleshooting |
|
|
ME-301 |
Preventive Maintenance and Troubleshooting of Pumps and Compressors |
|
|
ME-302 |
Fans and Blowers: Performance, Measurements and Maintenance |
|
|
ME-303 |
Pumps and Compressors: Predictive Maintenance in Diagnostics |
|
|
ME-304 |
Pumps Operation and Troubleshooting |
|
|
ME-305 |
Pumps, Compressors and Fans (Rotating Machines) |
|
|
ME-306 |
Gas Turbine Engineering |
|
|
ME-307 |
Pumps, Compressors and Turbines Troubleshooting |
|
|
ME-308 |
Water System Networking and Pumping Stations |
|
|
ME-309 |
Dry Gas Seal Operation, Maintenance, Installation and Commissioning |
|
|
ME-310 |
Predicative Maintenance of Pumps Using Condition Monitoring |
|
|
ME-311 |
Rotating Machinery: Practical Solutions to Unbalance and Misalignment |
|
|
ME-312 |
Centrifugal and Rotary Pumps: Fundamentals with Applications |
|
|
ME-313 |
Condition Monitoring and Diagnostic Engineering Management |
|
|
ME-314 |
Fault Diagnosis and Failure Prevention |
|
|
ME-315 |
Laser and Dial Indicator Alignment Practical Training |
|
|
ME-316 |
Boiler Water Treatment |
|
|
ME-317 |
Condition Monitoring of Critical Equipment and Corrective Actions |
|
|
ME-318 |
Conveyor Operations and Preventive Maintenance |
|
|
ME-319 |
Turbo Machinery Troubleshooting |
|
|
ME-320 |
Basics of Boilers Operation and Control |
|
|
ME-321 |
Gas Pipeline Hydraulic |
|
|
ME-322 |
Pumps and Valves: Operation, Maintenance and Troubleshooting |
|
|
ME-323 |
Heat Exchangers Design, Selection, ASME Section VIII Requirements and TEMA Code |
|
|
ME-324 |
Grinding Wheels |
|
|
ME-325 |
Centrifugal Pumps Maintenance and Overhauling |
|
|
ME-326 |
Troubleshooting Rotating and Stationary Equipment |
|
|
ME-327 |
Piping System Mechanical Design, Specification, Fabrication, Inspection, Flaw Analysis and Repair |
|
|
ME-328 |
Compressor Systems Mechanical Design and Specifications |
|
|
ME-329 |
Detailed Engineering of Process Piping System |
|
|
ME-331 |
Mechanical Components: Bolts, Nuts, Washers, Keys and Key Ways |
|
|
ME-332 |
Pump Maintenance and Mechanical Seal |
|
|
ME-333 |
Instrument Air System: Operation, Troubleshooting and Maintenance |
|
|
ME-334 |
Shaft Alignment: Methods and Application for Mechanical Maintenance Staff |
|
|
ME-335 |
Cummins and Perkins Diesel Generators |
|
|
ME-336 |
Rotating Equipment for Operation Staff (Pumps, Compressors, Turbines) |
|
|
ME-337 |
Damages and Repair of Pipelines and Oil Tanks |
|
|
ME-338 |
Safe Working with Compressed Air |
|
|
ME-339 |
Mechanical Seals: Failure Analysis and Maintenance (Advanced Course) |
|
|
ME-340 |
John Crane Dry Gas Seals and Conventional Mechanical Seals (Wet Seals) |
|
|
ME-342 |
Gas Turbine (Operation and Troubleshooting) for Operation Staff |
|
|
ME-343 |
Small Power Steam Turbines: (Operation, Troubleshooting and Maintenance) for Operation and Maintenance Staff |
|
|
ME-344 |
Failure Analysis Methodologies for Mechanical Engineers |
|
|
ME-345 |
Hydraulic Systems (for Mechanical Staff) |
|
|
ME-346 |
Combustion Techniques and Fired Heaters for Operation and Maintenance Staff |
|
|
ME-347 |
Cooling Towers Operation and Maintenance |
|
|
ME-348 |
Crude Oil Tanks: Design, Construction, Operation and Maintenance |
|
|
ME-349 |
Operation and Maintenance of Gas Compressors and Compression Station |
|
|
ME-350 |
Elliot Centrifugal Compressor Operation and Maintenance |
|
|
ME-351 |
Air Compressors Operation and Maintenance |
|
|
ME-353 |
Plant Utilities Equipment: Components for Each System, Construction and Operation (Advanced Course) |
|
|
ME-354 |
Crusher and Ball Mills Maintenance and Improving Crusher Reliability |
|
|
ME-355 |
Semi-portable Re-claimer and Belt Conveyors System |
|
|
ME-356 |
Cold and Hot Vulcanizing of Conveyor Belt |
|
|
ME-357 |
Practical Bulk Materials Handling (Conveyors, Bins, Hoppers and Feeders) |
|
|
ME-358 |
Flue Gas Treatment Plant, Electrostatic Precipitators and Fly Ash Conveying System Operation and Maintenance |
|
|
ME-359 |
Plant Mechanical Equipment for Maintenance and Operation Beginner Engineers – An Overview for Plant Mechanical Equipment |
|
|
ME-360 |
Nitrogen Plant Operation and Maintenance |
|
|
ME-361 |
Booster Compressor Station: Design, Equipment Selection, Construction and Operation |
|
|
ME-362 |
Pumps and Compressors Operation |
|
|
ME-363 |
Mechanical, Electrical and Instrument: MOL Skid (Main Oil Pump 11KV) Including Main Motor, Pump, Instrument Devices, MOV (Motor Operated Valves), and Space Heater: Troubleshooting, Inspection and Overhauls |
|
|
ME-364 |
Utility Equipment |
|
|
ME-365 |
Ammonia Compressor Operation |
|
|
ME-366 |
Ammonia Refrigeration |
|
|
ME-367 |
MTU Diesel Engine Maintenance |
|
|
ME-368 |
Rotating Machinery Pumps, Compressors, Turbines Operation, Monitoring & Troubleshooting |
|
|
ME-369 |
Static Equipment Monitoring and Troubleshooting |
|
|
ME-371 |
Forklift Driving and Operation |
|
|
ME-372 |
Safe Overhead Crane Operation |
|
|
ME-373 |
Sky Lift Operation |
|
|
PCM-104 |
PMP Certification Preparation Course |
|
|
|
Electrical and Power Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
E-101 |
11KV/415V Operation of Electrical Equipment |
|
|
E-102 |
13.8 kV And 34.5kV Cable Splicing and Termination Techniques |
|
|
E-103 |
13.8 kV Network Operation (Load Center) |
|
|
E-104 |
230/115/69KV Transmission Tower and Conductor Types |
|
|
E-105 |
AC Electrical Motor Control System |
|
|
E-106 |
Advanced Electrical Troubleshooting, Repairs and Isolations Techniques |
|
|
E-107 |
Advanced Generator Maintenance |
|
|
E-108 |
Advanced Lighting Design and Application |
|
|
E-110 |
Advanced Power Distribution Engineering |
|
|
E-111 |
Advanced Power Transmission Technologies |
|
|
E-116 |
Application of Electrical Science to Power Generation, Transmission and Utilization |
|
|
E-119 |
Automatic Tap Changer in Power Transformer |
|
|
E-120 |
Basic Electrical and Instrumentation Design |
|
|
E-121 |
Basic Electrical Engineering for Non-Electrical Engineers |
|
|
E-122 |
Basic Electrical Measuring Instruments and Test Equipment |
|
|
E-125 |
Cable Installation |
|
|
E-126 |
Cable Testing and Fault Location |
|
|
E-127 |
Capacitor Banks |
|
|
E-129 |
Commissioning, Testing and Start-up of Electrical Systems |
|
|
E-131 |
Condition Monitoring of Power System Equipment |
|
|
E-142 |
Diesel Power Generating Operation, Maintenance, Testing and Troubleshooting |
|
|
E-143 |
Digital and Static Protection Relays |
|
|
E-147 |
Distribution Materials Testing (Transformers, Cables, Switchgear, KWH Meters,...) for Engineers |
|
|
E-148 |
Distribution Network Maintenance |
|
|
E-149 |
Distribution Overhead Transmission Line Equipment |
|
|
E-150 |
Distribution Reliability and Power Quality |
|
|
E-151 |
Earthing, Bonding, Lightning and Surge Protection of Electrical Systems and Equipment |
|
|
E-152 |
Earthing of Utility and Industrial Distribution System |
|
|
E-153 |
Economy Dispatch of Power Plants |
|
|
E-154 |
Electric Distribution System Equipment Preventive Maintenance (EPM) and Engineering Principles |
|
|
E-155 |
Electric Distribution System Equipment: Transformers, Switchgears, Circuit Breakers, Relays, Capacitors, Surge Arresters, Cables and Meters: Operation, Inspection, Testing, Evaluation, Maintenance and Safety |
|
|
E-156 |
Electric Power Distribution System for Industrial Plants |
|
|
E-157 |
Electrical Demand Side Management (EDSM) |
|
|
E-158 |
Electrical Distribution Equipment Operation and Maintenance |
|
|
E-159 |
Electrical Distribution System Equipment Preventive Maintenance |
|
|
E-160 |
Electrical Drawing and Interlocking Circuit |
|
|
E-161 |
Electrical Engineering Practices for Facilities Engineers |
|
|
E-162 |
Electrical Equipment and Control System |
|
|
E-163 |
Electrical Equipment: Transformers, Inverters, Rectifiers, Uninterruptable Power Systems, Generators |
|
|
E-164 |
Electrical Installation and Maintenance |
|
|
E-165 |
Electrical Installation and Maintenance in Hazardous Locations |
|
|
E-166 |
Electrical Maintenance, Testing, Inspection and Risk Assessment |
|
|
E-167 |
Electrical Meter Theory, Applications and Maintenance |
|
|
E-168 |
Electrical Motors and Transformer Operation and Maintenance |
|
|
E-169 |
Electrical Power Distribution |
|
|
E-170 |
Electrical Preventive Maintenance |
|
|
E-171 |
Electrical Protective Relays, Switches and Circuit Breakers |
|
|
E-172 |
Electrical Substations Maintenance |
|
|
E-173 |
Electrical Substation Safety for Engineers and Technicians |
|
|
E-175 |
Fault Analysis in Electrical Networks and Distribution Cables |
|
|
E-182 |
Fundamentals of Electrical Systems |
|
|
E-183 |
Fundamentals of Frequency Control, AGC and Economic Dispatch |
|
|
E-189 |
Generator Excitation Systems: Design, Commissioning, Operation, Maintenance, Performance Analysis, Testing, Tuning, Repair and Troubleshooting |
|
|
E-190 |
Generator Maintenance |
|
|
E-191 |
Generators: Operations, Maintenance, Control, Testing and Troubleshooting |
|
|
E-192 |
Generator Protection |
|
|
E-193 |
Grid Station Meter Reading |
|
|
E-194 |
High and Medium Voltage Substation Design, Testing and Maintenance |
|
|
E-196 |
HV Equipment Testing |
|
|
E-197 |
HV Motors and Transformers: Design, Operations and Troubleshooting |
|
|
E-198 |
HV Switchgears |
|
|
E-211 |
Introduction to Reading of Electrical Drawings and Diagrams |
|
|
E-215 |
LV and HV Switchgears |
|
|
E-216 |
LV/MV/HV Circuit Breakers (Switchgears): Inspection, Maintenance, Design, Repair, Troubleshooting and Power Distribution |
|
|
E-217 |
LV Switchgears |
|
|
E-218 |
Lightning Protection and Insulation Coordination for Power Systems |
|
|
E-219 |
Major Generator Inspection and Testing |
|
|
E-220 |
Maintenance and Troubleshooting of LV/MV Switchgears |
|
|
E-221 |
Electrical Motors: Operation, Maintenance, Protection and Troubleshooting |
|
|
E-223 |
Mechanical Application for Transmission Line Networks |
|
|
E-224 |
Maintaining Voltage Stability and Avoiding Voltage Collapse in Power Systems |
|
|
E-227 |
Modern Electric Power Systems: Design, Modeling, Analysis and Problem Solving |
|
|
E-228 |
Modern Power Systems Protective Relaying |
|
|
E-229 |
Motors and Variables-Speed Drive: Selection, Sizing, Applications and Operations |
|
|
E-230 |
Motor Control Circuits Maintenance and Troubleshooting |
|
|
E-232 |
MV Circuit Breakers: Design, Applications and Maintenance |
|
|
E-233 |
National Electrical Codes (NEC) |
|
|
E-235 |
On Load Tap Changer |
|
|
E-236 |
Operation and Maintenance of Large Turbo Generators |
|
|
E-238 |
Overhead Lines Maintenance and Construction |
|
|
E-239 |
Overhead Lines Malfunctions and How to Fix Them |
|
|
E-240 |
Overhead Line Patrolling |
|
|
E-241 |
Overhead Transmission Line Grounding |
|
|
E-242 |
Overhead Transmission Line Vibration and Ways to Mitigate their Effect |
|
|
E-243 |
Performance of Generators and Exciters |
|
|
E-245 |
Power and Power Stations: Design, Installation and Maintenance |
|
|
E-246 |
Power Capacitors: Applications, Switching Problems, Protection and Maintenance |
|
|
E-247 |
Power Dispatching Orientation |
|
|
E-249 |
Power Generation: Gas Turbines, Steam Power Plant, Co-Generation and Combined Cycle Plants |
|
|
E-250 |
Power Generation Operation and Control |
|
|
E-251 |
Power Optimization of Energy Management System in Modern Power Generation Industry |
|
|
E-255 |
Power System Grounding |
|
|
E-256 |
Power System Planning and Economics |
|
|
E-257 |
Power System Protection and Optimum Selection of Relays |
|
|
E-259 |
Power System Protection in Utilities and Industrial Electrical Networks |
|
|
E-260 |
Power System Reliability |
|
|
E-261 |
Power System Stability and Dynamics |
|
|
E-262 |
Practical Design Criteria of Distribution Substations and Underground Cable Feeders |
|
|
E-264 |
Practical Grounding of Utility, Bonding, Lightning, Surge Protection and Industrial Distribution Systems |
|
|
E-265 |
High Voltage Cable Jointing and Termination |
|
|
E-266 |
Motor Protection, Testing, Control and Maintenance Technology |
|
|
E-267 |
Power Systems Protection for Technicians |
|
|
E-269 |
Variable Speed Drives (VSD's) for Instrumentation and Control Systems |
|
|
E-276 |
Process Yield Optimization and Energy Conservation |
|
|
E-277 |
Reactive Power Compensation |
|
|
E-278 |
Power Factor Correction |
|
|
E-280 |
Protective Relays Applications and Principles |
|
|
E-282 |
Electrical Power Substation Maintenance, Grounding and Safety |
|
|
E-284 |
Selection, Installation and Testing of Electrical Equipment in Hazardous Area |
|
|
E-285 |
Short Circuit and Fault Analysis Calculations in Distribution Power Systems |
|
|
E-288 |
Specification, Installation, Operation and Maintenance of Motors and Electric Drives |
|
|
E-289 |
Station Interlock Schemes |
|
|
E-290 |
Supervise the Execution of Overhead Lines Networks |
|
|
E-291 |
Testing and Troubleshooting of Electrical Machines |
|
|
E-292 |
The Hazards of Electricity with Potential Over 600V |
|
|
E-293 |
Transformers: Selection, Applications, Operation, Troubleshooting and Maintenance |
|
|
E-294 |
Transient Voltages of Power Systems |
|
|
E-295 |
Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives |
|
|
E-296 |
Troubleshooting of Electrical Equipment and Control Systems |
|
|
E-298 |
Type and Care of Overhead Lines Tools |
|
|
E-299 |
UPS System and Battery Chargers: Construction, Operation, Maintenance and Troubleshooting |
|
|
E-301 |
Variable Speed Drives (VSD) |
|
|
E-302 |
Variable Frequency Drives (VFD) Maintenance and Troubleshooting |
|
|
E-304 |
Synchronous Motor, Protection and AVR System |
|
|
E-307 |
Combined Cycle Power Generation |
|
|
E-308 |
Basics of Electrical Equipment (Transformers/Motors/Generators) |
|
|
E-309 |
Basics of Electrical Power System for Non Electrical Professionals |
|
|
E-313 |
Electrical Equipment and Control Circuits |
|
|
E-314 |
Electrical System Protection |
|
|
E-315 |
AC Electrical Motors Drives for Industrial Applications |
|
|
E-319 |
Plant Safety and Emergency Shutdown Systems |
|
|
E-320 |
Safety Integrity Systems (SIS) |
|
|
E-321 |
Compressor Control System |
|
|
E-324 |
Basic Power Generation, Transmission and Distribution |
|
|
E-325 |
Electrical Maintenance of Lighting Systems |
|
|
E-326 |
Reading And Interpreting of Electrical Diagrams |
|
|
E-327 |
Synchronous Machines Operation and Power Factor Improvement |
|
|
E-328 |
Three Phase AC Induction Motor and Control System |
|
|
E-329 |
Troubleshooting Electrical Control Circuits |
|
|
E-330 |
Power Smart Grid Technology |
|
|
E-333 |
Cable Tray, Conduit, Trunking and Wiring Installation |
|
|
E-334 |
Basic Electrical Control Circuits |
|
|
E-335 |
Power System Analysis |
|
|
E-341 |
Power Plant Electrification |
|
|
E-342 |
Power Plant Management |
|
|
E-344 |
Electrical Equipment Fault Analysis and Application of Protective Devices |
|
|
E-345 |
33/69kV Overhead Line Maintenance |
|
|
|
Chemical and Process Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
CPP-101 |
Basic Chemistry |
|
|
CPP-102 |
Basic Understanding of Petrochemicals |
|
|
CPP-103 |
Catalyst Technology in Refinery and Process Industry |
|
|
CPP-104 |
Chemical Engineering for Non-Chemical Engineers |
|
|
CPP-105 |
Crude Oil Storage, Marine Terminals Operations and Oil Movement Management |
|
|
CPP-106 |
Crude Stabilization Operations |
|
|
CPP-107 |
Distillation Columns: Design, Operation, Control and Troubleshooting |
|
|
CPP-108 |
Fertilizers (Ammonia And Urea) Plants Process Technology |
|
|
CPP-110 |
Fundamentals of Fluid Dynamics in Process Application |
|
|
CPP-111 |
Fundamentals of Heat Transfer in Process Application |
|
|
CPP-112 |
Fundamentals of Petrochemicals Operations and Applications |
|
|
CPP-113 |
Gas Conditioning and Processing |
|
|
CPP-114 |
Gas Conditioning Technology |
|
|
CPP-115 |
Gas Field Operations: Gas Processing, Hydrates, Dehydration, Sweetening, NGL Recovery, Fractionation, Sulphur Recovery and Handling |
|
|
CPP-116 |
Gas Processing for LNG and LPG Plants |
|
|
CPP-117 |
Gas Sweetening and Sulphur Recovery |
|
|
CPP-118 |
Gasoline and Diesel Fuel Technology |
|
|
CPP-119 |
Hydrocarbon Process Design and Modeling |
|
|
CPP-120 |
Hydrocarbon Processing for Non-Chemical Engineers |
|
|
CPP-121 |
Introduction to HYSYS Process Engineering |
|
|
CPP-122 |
Introduction to Oil Movements and Storage (OM&S) |
|
|
CPP-123 |
Introduction to Process Heaters |
|
|
CPP-124 |
LNG Plants Process Technology |
|
|
CPP-125 |
LNG: Storage, Loading, Unloading, Marine Operations, Measurement and Calculations |
|
|
CPP-129 |
Natural Gas Dehydration |
|
|
CPP-130 |
NGL and LPG Plants Process Technology |
|
|
CPP-131 |
Oil and Gas Processing for Non-Technical Staff |
|
|
CPP-132 |
Oil Field Chemicals: Function and Procedures |
|
|
CPP-133 |
Oil Processing, Dehydration and Desalting |
|
|
CPP-134 |
Operation and Routine Maintenance of Gas and Liquid Chromatograph |
|
|
CPP-135 |
Troubleshooting Process Operation |
|
|
CPP-137 |
Overview of Gas Processing |
|
|
CPP-138 |
PE (Poly Ethylene) Operations and Process Troubleshooting |
|
|
CPP-139 |
Petrochemical Plants Process Technology |
|
|
CPP-141 |
Physical and Chemical Properties of Oil and gases |
|
|
CPP-143 |
Polyethylene and Polypropylene Manufacturing and Process Troubleshooting |
|
|
CPP-144 |
PP (Poly Propylene) Operations and Process Troubleshooting |
|
|
CPP-145 |
Principles of Polymer Science |
|
|
CPP-146 |
Process Engineering Design Fundamentals |
|
|
CPP-147 |
Process Furnace: Operation, Troubleshooting, Start-Up and Shutdown |
|
|
CPP-148 |
Process Plant Optimization |
|
|
CPP-149 |
Process Plant Performance and Efficiency |
|
|
CPP-150 |
Process Plant Shutdown and Turnarounds |
|
|
CPP-151 |
Process Plant Start-up, Commissioning and Troubleshooting |
|
|
CPP-152 |
Process Plant Troubleshooting and Engineering Problem Solving |
|
|
CPP-153 |
Process Reactors: Operation, Troubleshooting, Start-up and Shutdown |
|
|
CPP-154 |
Process Troubleshooting, Problem Solving and Effective Decision Making |
|
|
CPP-155 |
Process Troubleshooting for Operators and Technicians |
|
|
CPP-158 |
PVC (Poly Vinyl Chloride) Operations and Process Troubleshooting |
|
|
CPP-159 |
Refinery Plants Process Technology |
|
|
CPP-161 |
Rules of Thumb for Chemical and Process Engineers |
|
|
CPP-162 |
Rules of Thumb for Chemical Engineers |
|
|
CPP-164 |
Chemical Plants Troubleshooting |
|
|
CPP-165 |
Refineries and Petrochemical Plants Troubleshooting |
|
|
CPP-166 |
Understanding Theoretical and Practical Aspects of Distillation |
|
|
CPP-174 |
Analytical Troubleshooting in Process Machinery and Pressure Vessels |
|
|
CPP-175 |
Dual Effect MVC Troubleshooting |
|
|
CPP-176 |
Flare and Pressure Relief Systems in Process Plant |
|
|
CPP-177 |
Oil and Gas Separation Equipment |
|
|
CPP-178 |
Natural Gas Dehydration and Hydrate Control |
|
|
CPP-179 |
Acid Gas Removal Technology |
|
|
CPP-180 |
Gas Plant Commissioning and Start-up |
|
|
CPP-181 |
Fundamentals of Gas Compression |
|
|
CPP-182 |
Surface Production Operations |
|
|
CPP-183 |
Gas Processing and Conditioning |
|
|
CPP-184 |
Sulfur Recovery and Tail Gas Treatment Technology |
|
|
CPP-186 |
Gas Production Course for Operators |
|
|
CPP-187 |
Process Modeling Using Unisim Design |
|
|
CPP-188 |
Advanced NGL Recovery |
|
|
CPP-191 |
Boilers and Thermal Fluid Heaters |
|
|
CPP-192 |
Process Troubleshooting Workshop Case Studies and Solutions |
|
|
CPP-193 |
Fired Process Heaters Operation, Control and Troubleshooting |
|
|
CPP-194 |
Catalyst Selection and Production Optimization |
|
|
CPP-195 |
Molecular Sieves Dryer-Adsorption |
|
|
CPP-197 |
CPF (General) |
|
|
CPP-198 |
New Desalter Crude Heaters - DS6 and DS8 |
|
|
CPP-199 |
Applied Facilities Design and Surveillance |
|
|
CPP-200 |
Oilfield Chemical |
|
|
CPP-201 |
Process Facility Operations |
|
|
CPP-202 |
Troubleshooting of Urea Production |
|
|
CPP-203 |
Process Optimization and De-Bottlenecking |
|
|
CPP-204 |
Advanced Energy Optimization of Refineries |
|
|
CPP-205 |
Aromatics Processes, Technology and Markets |
|
|
CPP-206 |
Furnace and Boiler Operation, Control and Troubleshooting |
|
|
CPP-207 |
Basic Gas Separation and Crude Oil Treatment |
|
|
CPP-208 |
Fundamentals of Analytical Chemistry |
|
|
CPP-209 |
Advanced Process Engineering Designs |
|
|
|
Maintenance and Reliability Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
M-101 |
Advanced Maintenance Management |
|
|
M-102 |
Applied Maintenance Management |
|
|
M-103 |
Computerized Maintenance Management System (CMMS) |
|
|
M-104 |
Condition Based Maintenance (CBM) |
|
|
M-105 |
Cost Effective Maintenance Management |
|
|
M-106 |
Maintenance and Reliability Management |
|
|
M-107 |
Maintenance Management |
|
|
M-108 |
Maintenance Planning, Scheduling and Work Control |
|
|
M-109 |
Maintenance Supervision |
|
|
M-110 |
Management and Planning Production Operations |
|
|
M-111 |
Modern Maintenance Technologies |
|
|
M-112 |
Planning for Maintenance (Mechanical, Electrical and Civil) |
|
|
M-113 |
Practical Plant Shutdown and Turnaround Planning and Management |
|
|
M-114 |
Preventive and Predictive Maintenance |
|
|
M-115 |
Preventive Maintenance (Mechanical, Electrical and Civil) |
|
|
M-116 |
Reliability Centered Maintenance (RCM) |
|
|
M-117 |
Total Plant Maintenance |
|
|
M-118 |
Total Productive Maintenance |
|
|
M-119 |
Global Maintenance (Maintenance Management Skills and Techniques) |
|
|
M-120 |
Engineering Maintenance Management |
|
|
M-121 |
Advanced Predictive Maintenance |
|
|
M-122 |
Maintenance Techniques (Preventive, Predictive, and Cost Effective Operation Management) |
|
|
M-123 |
Maintenance Excellence: Optimizing Equipment Life-Cycle Decisions |
|
|
M-124 |
Risk and Decision Analysis in Maintenance Optimization |
|
|
M-125 |
An Introduction to Predictive Maintenance |
|
|
M-126 |
Optimizing Equipment Maintenance and Replacement Decisions |
|
|
M-127 |
Reliability, Maintainability and Risk |
|
|
M-128 |
Advanced Root Cause Failure Analysis (RCFA) |
|
|
M-129 |
Condition Monitoring Techniques |
|
|
M-130 |
Fundamentals of Mechanical Maintenance System |
|
|
M-131 |
Advanced Preventive and Predictive Maintenance |
|
|
M-133 |
Introduction to Reliability Engineering and Gas Turbines |
|
|
M-134 |
Advanced Reliability Engineering Methods (AREM) & System Failure Propagation Analysis |
|
|
M-135 |
Reliability Analysis |
|
|
M-136 |
Predictive Maintenance for Electrical Components in Vehicles |
|
|
M-137 |
Vibration Measurement and Analysis |
|
|
|
Laboratory and Analyzers Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
LA-101 |
Advanced Gas Chromatography Techniques and Troubleshooting |
|
|
LA-102 |
Analytical Chemistry and Process Analyzers |
|
|
LA-103 |
Analytical Instrumentation for Laboratory |
|
|
LA-104 |
Basic Chemistry for Laboratory Technicians and Analyst |
|
|
LA-105 |
Chemical Laboratory: Operations, Equipment, Instruments, Quality and Safety |
|
|
LA-106 |
Chromatography/Mass Spectrometry (GC/MS): Technology, Problem Solving and Latest Practice |
|
|
LA-107 |
Effective Management of the Chemical Analysis Support |
|
|
LA-109 |
Gas Chromatography: Fundamentals, Troubleshooting and Method Development |
|
|
LA-110 |
GC Troubleshooting and User Maintenance GAS Chromatography |
|
|
LA-111 |
General Analytical Chemistry |
|
|
LA-112 |
Good Laboratory Practice |
|
|
LA-113 |
High Performance Liquid Chromatography |
|
|
LA-114 |
Industrial Analytical Chemistry |
|
|
LA-115 |
Laboratory Environmental Analysis: Air, Soils and Water |
|
|
LA-116 |
Laboratory Equipment, Instruments and Safety |
|
|
LA-117 |
Laboratory Instrument Calibration |
|
|
LA-118 |
Laboratory Safety and Health |
|
|
LA-119 |
Modern Laboratory Management |
|
|
LA-120 |
Moisture Analyzer |
|
|
LA-121 |
Online Analyzers Application and Troubleshooting |
|
|
LA-122 |
Practical Problem Solving in Chemical Analysis |
|
|
LA-123 |
Process Analyzer Techniques - Online and Offline (Lab Equipment Overview and Maintenance) |
|
|
LA-124 |
Samples Preparation |
|
|
LA-125 |
Set Up and Run Experiments |
|
|
LA-126 |
Solid Phase Extraction Technology and Techniques in the Analytical Laboratory |
|
|
LA-127 |
Spectroscopic Methods in Analytical Chemistry |
|
|
LA-128 |
Statistical Analysis of Lab Data |
|
|
LA-129 |
Microbiology and Chemical Application Techniques |
|
|
LA-130 |
Laboratory Equipment and Analysis Performing in Oil Fields Labs |
|
|
LA-131 |
Water Analysis in Petroleum Industry |
|
|
|
Marine and Offshore Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
MO-102 |
Jetty Operations and Safety for Oil and Gas Terminals |
|
|
MO-103 |
ISGOTT Ship Shore |
|
|
MO-104 |
Liquefaction Gas Tankers and Jetty Operations |
|
|
MO-105 |
Oil and Gas Tankers Loading |
|
|
MO-106 |
Oil and Gas Terminals: Operations and Management |
|
|
MO-108 |
Petrochemical Marine Terminal and Operations |
|
|
MO-109 |
Tanker Fleet Ownership, Chartering and Operation |
|
|
MO-110 |
Search and Rescue (SAR) |
|
|
MO-111 |
Vessel Traffic Service (VTS) |
|
|
MO-112 |
Navigation Aids on Board Modern Fleet |
|
|
MO-113 |
HAZMAT – International Maritime Dangerous Goods (IMDG Code) |
|
|
MO-114 |
International Safety Management (ISM Code) |
|
|
MO-115 |
Mooring and Anchoring |
|
|
MO-116 |
Personal Safety On Board (PPE) |
|
|
MO-117 |
Port State Control and Vetting Inspections |
|
|
MO-118 |
Maritime Fire Fighting Equipment and Life Saving Appliances |
|
|
MO-119 |
Wires and Ropes (Maintenance and Inspection) |
|
|
MO-120 |
Tanker Feminization |
|
|
MO-121 |
Tanker Safety |
|
|
MO-122 |
Tanker Technology |
|
|
MO-123 |
Tanker Chartering |
|
|
MO-124 |
Ship to Ship Petroleum Transfer |
|
|
MO-125 |
Tug and Tow |
|
|
MO-126 |
Bridge Recourse Management (BRM) |
|
|
MO-127 |
Principle of Navigation |
|
|
MO-128 |
Ballast Water Management (BWM) |
|
|
MO-129 |
Automatic Identification System (AIS) |
|
|
MO-130 |
Voyage Data Recorder (VDR and SVDR) |
|
|
MO-131 |
Principle of Environmental Protection and Safe Navigation |
|
|
MO-132 |
Risk Management |
|
|
MO-133 |
Accident Investigations |
|
|
MO-134 |
Lashing and Securing of Cargo |
|
|
MO-135 |
The International Regulations for Preventing Collisions at Sea (COLREGs) and Maritime Buoyage System (IALA) |
|
|
MO-136 |
Ship Design, Construction and Operation |
|
|
MO-137 |
Crisis Management and Human Behavior |
|
|
MO-138 |
Ship Security Officer on Board |
|
|
MO-139 |
Rating Forming Part of a Navigational Watch |
|
|
MO-140 |
Rating Forming Part of an Engineering Watch |
|
|
MO-141 |
Electronic Chart Display and Information System (ECDIS) |
|
|
MO-142 |
Prevention of Pollution at Sea (Including SOPEP) |
|
|
MO-143 |
Draft Survey |
|
|
MO-144 |
Deadweight Survey |
|
|
MO-145 |
Ullage Survey – Slurry ORE Cargo |
|
|
MO-146 |
Ullage Survey – Oil Cargoes |
|
|
MO-147 |
Bunker Survey |
|
|
MO-148 |
Gas Survey |
|
|
MO-149 |
Port Security Officer |
|
|
MO-150 |
Company Security Officer (CSO) |
|
|
MO-151 |
Maritime Law and Shipping Contracts |
|
|
MO-152 |
Port Engineering and Marine Structures Design and Management |
|
|
MO-153 |
Cathodic Protection for Ports |
|
|
|
Geology, Drilling and Reservoirs Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
GDR-101 |
Applied Reservoir Management |
|
|
GDR-102 |
Artificial Lift Methods |
|
|
GDR-104 |
Basic Principles in Petroleum Geology |
|
|
GDR-105 |
Beam Pumps |
|
|
GDR-105 |
Beam Pumping Operations |
|
|
GDR-106 |
Blowout Prevention (BOP) and Well Control |
|
|
GDR-107 |
Directional, Horizontal and Multilateral Drilling |
|
|
GDR-108 |
Drilling and Drilling Fluids |
|
|
GDR-109 |
Drilling Calculations |
|
|
GDR-110 |
Drilling Waste Management |
|
|
GDR-111 |
Gas Lift |
|
|
GDR-112 |
Horizontal and Multilateral Wells Design and Analysis |
|
|
GDR-113 |
Integrated Production Modeling - PROSPER, GAP and MBAL |
|
|
GDR-114 |
Integration of Rocks, Log and Test Data |
|
|
GDR-115 |
Mapping Subsurface Structures |
|
|
GDR-118 |
Optimized HPHT "High Pressure High Temperature" Drilling Solutions |
|
|
GDR-119 |
Permit to Work for Drilling |
|
|
GDR-120 |
Production Logging and Reservoir Monitoring |
|
|
GDR-121 |
PVT Analysis |
|
|
GDR-122 |
Reservoir Engineering - Basic |
|
|
GDR-123 |
Rock Physics for Reservoir Characterization and Recovery Monitoring |
|
|
GDR-124 |
Safety in Drilling Engineering |
|
|
GDR-125 |
Upstream in Oil and Gas Industry |
|
|
GDR-126 |
Well Completion Methods and Workover Operations |
|
|
GDR-126 |
Well Completion and Basic Well Intervention |
|
|
GDR-127 |
Wireline Operations and Fundamentals |
|
|
GDR-128 |
Basic Drill String Design |
|
|
GDR-129 |
Cementing Practices |
|
|
GDR-130 |
Stuck Pipe Prevention |
|
|
GDR-131 |
Characterization of Carbonate Reservoirs |
|
|
GDR-132 |
Drilling Engineering for Non Drilling Engineers |
|
|
GDR-133 |
Introduction to Drilling Technology |
|
|
GDR-134 |
Rig Mathematics and Drilling Calculations |
|
|
GDR-136 |
Casing and Cementing |
|
|
GDR-137 |
Drilling Optimization and Well Planning |
|
|
GDR-138 |
Well Stimulation Methods Acidizing and Hydraulic Fracturing |
|
|
GDR-139 |
Under-Balanced Drilling Technology |
|
|
GDR-140 |
Formation Damage Causes, Prevention and Treatment |
|
|
GDR-141 |
Stuck Pipe and Fishing Operations |
|
|
GDR-142 |
Rock Mechanics, Borehole Stability and Advanced Drilling Practices |
|
|
GDR-143 |
Advanced Extended Reach Drilling (ERD) |
|
|
GDR-144 |
Enhanced Oil Recovery |
|
|
GDR-145 |
Applied Sequence Stratigraphy |
|
|
GDR-146 |
Seismic Stratigraphy |
|
|
GDR-147 |
Deepwater Reservoirs |
|
|
GDR-148 |
Coastal Plain and Shallow Marine Reservoirs |
|
|
GDR-149 |
Petroleum Geology for Non-Geologists |
|
|
GDR-150 |
Reservoir Characterization |
|
|
GDR-151 |
Advanced Sequence Stratigraphy |
|
|
GDR-152 |
Casing Design |
|
|
GDR-153 |
Well Control and Production Management Systems |
|
|
GDR-154 |
Well Intervention Operations |
|
|
GDR-155 |
Well Control Operations |
|
|
GDR-156 |
Surface Production Facilities |
|
|
GDR-157 |
Production Operations |
|
|
GDR-158 |
Electrical Submersible Pumps (ESP) |
|
|
GDR-159 |
Hydraulic Fracturing |
|
|
GDR-160 |
Well Stimulation Operations |
|
|
GDR-161 |
Production Problem Solving |
|
|
GDR-162 |
Wellhead Control System |
|
|
GDR-163 |
Production Engineering for Non-Production Engineers |
|
|
GDR-164 |
Well Testing Operations and Analysis |
|
|
GDR-165 |
Well Completion Basic |
|
|
GDR-166 |
Well Completion Intermediate |
|
|
GDR-167 |
Well Completion Advanced |
|
|
GDR-168 |
Well Integrity Management System (WIMS) |
|
|
GDR-169 |
CO2 Removal |
|
|
GDR-170 |
Mercury Handling |
|
|
GDR-171 |
Wellbore Treatment |
|
|
GDR-172 |
Water Injection System |
|
|
GDR-173 |
Coiled Tubing Operations |
|
|
GDR-174 |
Heavy and Sand Oil Production |
|
|
GDR-175 |
Sand Production Management |
|
|
GDR-176 |
Water Drive Reservoir |
|
|
GDR-177 |
Advanced Stimulation and Matrix Treatment Operations (ASME PCC-22) |
|
|
GDR-178 |
Scaling Problems and Solutions |
|
|
GDR-179 |
Introduction to Petrophysics |
|
|
GDR-180 |
Advanced Petrophysics |
|
|
GDR-181 |
Unconventional Hydrocarbons Asset Assessment |
|
|
GDR-182 |
Fundamentals of Well Logging |
|
|
GDR-183 |
Open Hole Logging and Interpretations |
|
|
GDR-184 |
Cased Hole and Production Log Evaluation |
|
|
GDR-185 |
Formation Evaluation |
|
|
GDR-186 |
Conventional Core Analysis |
|
|
GDR-187 |
Special Core Analysis |
|
|
GDR-188 |
Application of Geochemistry in Exploration |
|
|
GDR-189 |
Advanced Seismic Interpretation |
|
|
GDR-191 |
Petroleum Seismic Exploration |
|
|
GDR-193 |
Integrated Reservoir Management |
|
|
GDR-194 |
Reservoir Management and Monitoring |
|
|
GDR-195 |
Gas Production Engineering |
|
|
GDR-196 |
Petrophysics of Unconventional Reservoirs |
|
|
GDR-197 |
Reservoir Management for Unconventional Reservoir |
|
|
GDR-198 |
Evaluation and Developing Shale Resources |
|
|
GDR-199 |
Unconventional Resources Completion and Stimulation |
|
|
GDR-200 |
Well Design and Engineering |
|
|
GDR-201 |
Well Test Design and Analysis |
|
|
GDR-202 |
Unconventional Resources (Basic Level) |
|
|
GDR-203 |
Well Construction/Drilling |
|
|
GDR-204 |
X-mas Tree and Wellhead Operations, Maintenance and Testing |
|
|
GDR-205 |
Acid Stimulation |
|
|
GDR-206 |
Acidizing/Fracturing Fundamentals |
|
|
GDR-207 |
Advanced Electrical Submersible Pumps (ESP) |
|
|
GDR-208 |
Basic OFM |
|
|
GDR-209 |
Flow Conformance and Zonal Isolation |
|
|
GDR-210 |
Introduction to Sucker Rod Pumping |
|
|
GDR-211 |
Introduction to Surface Facility |
|
|
GDR-212 |
Nodal Analysis |
|
|
GDR-213 |
Pressure/Rate Transient Analysis |
|
|
GDR-214 |
Production System Surveillance and Optimization |
|
|
GDR-215 |
Introduction to Geomechanics |
|
|
GDR-216 |
Advanced Geomechanics |
|
|
GDR-217 |
Applied Structural Geology |
|
|
GDR-218 |
Naturally Fractured Reservoirs |
|
|
GDR-219 |
Middle East Regional Geology |
|
|
GDR-220 |
Rock Characterization and Rock Mechanics |
|
|
GDR-221 |
Fractures Analysis and Modeling |
|
|
GDR-222 |
Sedimentology |
|
|
GDR-223 |
Rock Typing and Reservoir Characterization |
|
|
GDR-224 |
Diagenesis Studies of Sandstone Reservoirs |
|
|
GDR-225 |
Petroleum Engineering for Non-Petroleum Engineers |
|
|
GDR-226 |
Progressing Cavity Pumps (PCP) |
|
|
|
Management, Leadership and Soft Skills |
| Ref. # |
Course Title |
Outline |
Proposal |
|
MLSS-101 |
21 Laws of Leadership |
|
|
MLSS-102 |
Advanced Communication and Problem Solving Skills |
|
|
MLSS-103 |
Advanced Leadership Skills |
|
|
MLSS-104 |
Advanced Leadership and Management for 21st Century |
|
|
MLSS-105 |
Advanced Management and Leadership Skills for Supervisors |
|
|
MLSS-106 |
Advanced Negotiation, Communication and Presentation Skills |
|
|
MLSS-107 |
Advanced Negotiation Skills |
|
|
MLSS-108 |
Advanced Office Management and Effective Administration Skills |
|
|
MLSS-109 |
Advanced Supervisory Skills |
|
|
MLSS-110 |
Advanced Technical Report Writing |
|
|
MLSS-111 |
Advanced Presentation Skills |
|
|
MLSS-112 |
Balanced Scorecard Skills |
|
|
MLSS-113 |
Balancing Skills for Leadership and Management |
|
|
MLSS-115 |
Basic Technical Report Writing |
|
|
MLSS-118 |
Building High Performance Teams |
|
|
MLSS-119 |
Business Communication |
|
|
MLSS-121 |
Business Report Writing Skills |
|
|
MLSS-124 |
Change Management |
|
|
MLSS-125 |
Coaching and Mentoring |
|
|
MLSS-126 |
Coaching, Appraising, Controlling and Motivation |
|
|
MLSS-127 |
Coaching for High Performance |
|
|
MLSS-128 |
Communication and Dealing with Others |
|
|
MLSS-129 |
Communication, Negotiation and Presentation Skills |
|
|
MLSS-136 |
Create a Dynamic Team |
|
|
MLSS-137 |
Creative Thinking for Continuous Improvement |
|
|
MLSS-138 |
Creative Problem Solving and Decision Making |
|
|
MLSS-139 |
Conflict Management for Managers |
|
|
MLSS-140 |
Conflict Management Skills |
|
|
MLSS-141 |
Developing Managerial and Supervisory Skills |
|
|
MLSS-142 |
Developing Training Officers |
|
|
MLSS-143 |
Developing your Personal Influence and Impact |
|
|
MLSS-144 |
Discover your Unlimited Potential |
|
|
MLSS-145 |
Effective Business Communication and Presentation Skills |
|
|
MLSS-146 |
Executive Coaching for Top Management |
|
|
MLSS-147 |
Effective Communication Skills |
|
|
MLSS-148 |
Effective Negotiation Skills: How to Increase your Effectiveness |
|
|
MLSS-149 |
Effective Office Supervision |
|
|
MLSS-150 |
Effective Organizational Behavior |
|
|
MLSS-151 |
Effective Planning Skills |
|
|
MLSS-152 |
Effective Supervisory Skills |
|
|
MLSS-153 |
Effective Time and Stress Management |
|
|
MLSS-154 |
Effective Time Management and Communication |
|
|
MLSS-155 |
Effective Writing Skills and Business Communication |
|
|
MLSS-156 |
Emotional Intelligence |
|
|
MLSS-157 |
Enhanced Productivity Skills |
|
|
MLSS-158 |
Essential Managerial Skills |
|
|
MLSS-159 |
Executive Secretary and Office Management |
|
|
MLSS-160 |
Facilitation Skills |
|
|
MLSS-161 |
Fast Reading Techniques |
|
|
MLSS-162 |
Firm KPI's (Key Performance Indicators) for Manager |
|
|
MLSS-163 |
Focusing and Achieving your Highest Priorities |
|
|
MLSS-164 |
Four Roles of Leaders |
|
|
MLSS-168 |
Improving Office Productivity and Time Management |
|
|
MLSS-169 |
Improving Organizational Productivity "The Productive Manager" |
|
|
MLSS-170 |
Improving your Managerial Effectiveness |
|
|
MLSS-171 |
Influence Skills |
|
|
MLSS-172 |
Innovative and Creative Thinking |
|
|
MLSS-177 |
Key Performance Indicators (KPI) |
|
|
MLSS-180 |
Leadership and Management in Times of Pressure, Stress and Crisis |
|
|
MLSS-181 |
Leadership, Communication and Interpersonal Skills |
|
|
MLSS-182 |
Leadership, Critical Thinking and Innovation |
|
|
MLSS-183 |
Leadership Development |
|
|
MLSS-184 |
Leadership, Management and Delegation Skills |
|
|
MLSS-185 |
Leadership and Management Skills in 21st Century |
|
|
MLSS-186 |
Leadership, Productivity and Organizational Behavior |
|
|
MLSS-187 |
Leadership Skills for Managers |
|
|
MLSS-188 |
Leadership Skills for Supervisors |
|
|
MLSS-189 |
Management Skills and Techniques for Engineers |
|
|
MLSS-190 |
Managing and Coordinating Training Proactively |
|
|
MLSS-191 |
Managing Conflict and Handling Difficult People |
|
|
MLSS-192 |
Managing Conflict: Power Thru Influence |
|
|
MLSS-193 |
Managing Difficult People |
|
|
MLSS-194 |
Managing Employee Performance |
|
|
MLSS-195 |
Managing, Motivating and Leading Teams |
|
|
MLSS-196 |
Managing Multiple Tasks, Priorities and Deadlines |
|
|
MLSS-197 |
Managing People for Greater Productivity |
|
|
MLSS-200 |
Maximizing Benefits Delivered Through Change |
|
|
MLSS-201 |
Maximizing Leadership Potential |
|
|
MLSS-202 |
Motivating, Coaching, Counseling and Mentoring |
|
|
MLSS-203 |
Negotiation and Conflict Resolution |
|
|
MLSS-204 |
Negotiation Skills and Dispute Resolution |
|
|
MLSS-208 |
Personality at Work |
|
|
MLSS-209 |
Planning and Managing Effective Meetings |
|
|
MLSS-210 |
Planning, Organizing and Problem Solving Skills |
|
|
MLSS-211 |
Planning, Scheduling and Time Management |
|
|
MLSS-212 |
Preparing and Developing Training Specialists |
|
|
MLSS-213 |
Present Like a Pro! |
|
|
MLSS-216 |
Results Based Leadership |
|
|
MLSS-217 |
Self and Time Management |
|
|
MLSS-218 |
Self Development |
|
|
MLSS-219 |
Seven Habits of Highly Effective People |
|
|
MLSS-220 |
Strategy and Strategic Planning |
|
|
MLSS-221 |
Stress and Time Management for Enhanced Productivity |
|
|
MLSS-222 |
Situation Management |
|
|
MLSS-223 |
Strategic Thinking and Business Planning |
|
|
MLSS-225 |
Successful Training Manager |
|
|
MLSS-227 |
Team Building Workshop |
|
|
MLSS-228 |
The Middle Manager Development |
|
|
MLSS-233 |
Turning Stress into High Productivity |
|
|
MLSS-236 |
Mini MBA |
|
|
MLSS-237 |
Achieving Operational Excellence |
|
|
MLSS-238 |
Management Engineering |
|
|
MLSS-239 |
Enthusiastic Performance |
|
|
MLSS-240 |
Achieving Ambition at Work |
|
|
MLSS-241 |
Commit Yourself to Tasks and Goals |
|
|
MLSS-244 |
Entrepreneurship Masterclass |
|
|
MLSS-245 |
Creativity and Innovative Thinking Masterclass |
|
|
MLSS-246 |
Self and Time Management for Enhanced Productivity |
|
|
MLSS-247 |
Mastering Leadership Skills for Managers and Supervisors |
|
|
MLSS-248 |
Comprehensive Course for Managers |
|
|
MLSS-249 |
International Business Etiquette and Protocol |
|
|
MLSS-250 |
Feasibility Studies Preparation, Analysis and Evaluation |
|
|
MLSS-252 |
Customer Service Compliance and Excellence |
|
|
MLSS-253 |
Effective Management Skills - Shape your Future |
|
|
MLSS-254 |
The Comprehensive Guide of Leadership Skills |
|
|
MLSS-255 |
Public Speaking and Presentation Skills Masterclass |
|
|
MLSS-256 |
Business Process Re-Engineering (BPR) |
|
|
MLSS-257 |
Sustainability Principles |
|
|
MLSS-262 |
Leadership: Making an Impact and Inspiring your Organization Management |
|
|
MLSS-263 |
Business Legal English Translation |
|
|
MLSS-264 |
Leading Change and Organization Development |
|
|
MLSS-265 |
Management: Improving the Performance of Individuals, Teams, the Business and Yourself |
|
|
MLSS-266 |
Essential Leaderpreneurship Skills for Managers in a World of Disruption |
|
|
MLSS-267 |
Being More Productive |
|
|
MLSS-268 |
Leaders Program: Develop your High-Potentials |
|
|
MLSS-269 |
Organizational Leadership |
|
|
MLSS-270 |
Executive Leaders Coaching |
|
|
MLSS-271 |
Effective Organizational Communication |
|
|
MLSS-272 |
Risk Management for Leaders |
|
|
MLSS-273 |
Innovation Strategy |
|
|
MLSS-274 |
Agile Business Strategy and Organisational Development |
|
|
MLSS-275 |
Collaborative Work in an Ethical Environment |
|
|
MLSS-276 |
Leading through VUCA (Volatility, Uncertainty, Complexity and Ambiguity) |
|
|
MLSS-277 |
People Management and Team Leadership Masterclass |
|
|
MLSS-278 |
Saudi Labor Law |
|
|
MLSS-279 |
Strategic Leadership in Government Masterclass |
|
|
MLSS-280 |
Comprehensive Course on Executive Management and Leadership Development |
|
|
MLSS-281 |
Work Ethics Masterclass |
|
|
MLSS-282 |
Sustainable Business Strategy and Circular Economy |
|
|
MLSS-283 |
Sustainability Leadership and Corporate Responsibility |
|
|
MLSS-284 |
Corporate Sustainability and ESG Reporting |
|
|
|
Project, Contract and Procurement Management |
| Ref. # |
Course Title |
Outline |
Proposal |
|
PCM-101 |
Advanced Contracts and Project Management |
|
|
PCM-102 |
Contract Management |
|
|
PCM-103 |
Negotiation, Managing and Administration Framework Contracts |
|
|
PCM-105 |
Project Management: Planning and Execution |
|
|
PCM-106 |
Project Procurement and Contract Management |
|
|
PCM-107 |
Project Planning and Scheduling |
|
|
PCM-108 |
Contracts Law of Business |
|
|
PCM-109 |
Strategic Sourcing |
|
|
PCM-110 |
Managing Vendor Qualification, Performance and Contract Compliance |
|
|
PCM-111 |
Leading and Managing Vendor Relations |
|
|
PCM-112 |
Managing Tenders, Specifications and Contracts |
|
|
PCM-113 |
Purchasing Management Masterclass |
|
|
PCM-114 |
Procurement Best Practices |
|
|
PCM-115 |
Strategic Procurement and Purchasing |
|
|
PCM-116 |
Mastering Contracts Management |
|
|
PCM-117 |
Advanced Tendering Procedures and Bid Evaluation |
|
|
PCM-118 |
Commercial and Business Contracts: A Practical Guide |
|
|
PCM-119 |
Contract Risk Management and Compliance |
|
|
PCM-120 |
Contract Drafting |
|
|
PCM-121 |
Contract Administration Fundamentals |
|
|
PCM-122 |
Contract Claims Assessment and Management |
|
|
PCM-123 |
Contracting Structures and Project Delivery |
|
|
PCM-124 |
Negotiating with Contractors |
|
|
PCM-125 |
Dispute Resolution in Contracts |
|
|
PCM-126 |
Effective Purchasing, Tendering and Supplier Selection |
|
|
PCM-127 |
E-Procurement Strategies for Success |
|
|
PCM-128 |
Suppliers Relationships Management (SRM) |
|
|
PCM-129 |
Advanced Negotiation Skills in Procurement |
|
|
PCM-130 |
Procurement Risk Management |
|
|
PCM-131 |
Effective Leadership in Purchasing |
|
|
PCM-132 |
Advanced Purchasing Skills |
|
|
PCM-133 |
SAP Applications in Procurement Management |
|
|
PCM-134 |
Fundamentals of Project Management |
|
|
PCM-135 |
Project Leadership, Management and Communication |
|
|
PCM-136 |
Understanding and Fast-Tracking Project Approvals |
|
|
PCM-137 |
Project Risk Management and Compliance |
|
|
PCM-138 |
Project Management Essentials |
|
|
PCM-139 |
Project Monitoring, Evaluation and Control |
|
|
PCM-140 |
Earned Value Management |
|
|
PCM-141 |
Advanced Contracts and Tenders |
|
|
PCM-142 |
Advanced Contracts Management |
|
|
PCM-143 |
Advanced Project Management |
|
|
PCM-144 |
Traditional and Agile Project Management Best Practices |
|
|
PCM-145 |
Economic Evaluation for Projects (New Projects/ Existing Projects Expansion) |
|
|
PCM-146 |
Contract Management for Procurement |
|
|
PCM-147 |
Cost Estimation and Value Engineering |
|
|
PCM-148 |
Cost Engineering and Risk Management |
|
|
PCM-149 |
Advanced Cost Engineering and Risk Management |
|
|
PCM-150 |
Risk and Earned Value Management |
|
|
PCM-151 |
Project Strategy Development in the Oil and Gas Industry |
|
|
PCM-152 |
FIDIC Contracts Management |
|
|
PCM-153 |
Petroleum Projects Risk Analysis and Economics Masterclass |
|
|
PCM-154 |
Project Budgeting and Cost Management |
|
|
|
Finance and Accounting |
| Ref. # |
Course Title |
Outline |
Proposal |
|
FA-101 |
Accounting and Financial Analysis |
|
|
FA-102 |
Accounting for Non Accountant |
|
|
FA-103 |
Advanced Financial Modeling |
|
|
FA-104 |
Advanced Strategy in Financial Auditing |
|
|
FA-105 |
The Complete Course on Budgeting and Cost Control |
|
|
FA-106 |
Budgeting as a Tool for Decision Making |
|
|
FA-107 |
Budgeting Principals for Managers |
|
|
FA-108 |
Business Management Ratios - How to Judge the Success of a Company |
|
|
FA-109 |
Cash Flow Analysis and Planning |
|
|
FA-110 |
Cash Flow and Risk Management |
|
|
FA-111 |
Corporate Treasury Management |
|
|
FA-113 |
Effective Budgeting and Financial Management |
|
|
FA-114 |
Efficient Finance and Accounting Operations |
|
|
FA-115 |
Finance and Cash Flow Management |
|
|
FA-116 |
Finance for Executives |
|
|
FA-117 |
The Comprehensive Finance Course for Non Finance Professionals |
|
|
FA-118 |
Financial Analysis and Evaluation for Business Planning and Decision Making |
|
|
FA-119 |
General Finance and Accounting Skills |
|
|
FA-120 |
Internal Financial Reporting Standards (IFRS) with Emphasis on Recent Practices and Updates |
|
|
FA-121 |
Principles of Accounting |
|
|
FA-122 |
Financial Accounting and Reporting |
|
|
FA-123 |
Advanced Financial Statement Analysis |
|
|
FA-124 |
Effective Financial Controller |
|
|
FA-125 |
Basics of Finance and Accounting |
|
|
FA-126 |
Accounts Payable |
|
|
FA-127 |
Financial Planning and Budgeting |
|
|
FA-129 |
Using Letters of Credits and Drafts |
|
|
FA-130 |
General Accounting, Control and Internal Auditing |
|
|
FA-131 |
Financial Controllers and CFOs Workshop |
|
|
FA-132 |
Finance for Non Finance Managers |
|
|
FA-133 |
Business Finance for SMEs |
|
|
FA-134 |
Accounts Receivable |
|
|
|
Logistics, Inventory, Transportation and Supply Chain Management |
| Ref. # |
Course Title |
Outline |
Proposal |
|
WIP-101 |
Advanced Logistics and Supply Chain Management |
|
|
WIP-103 |
Effective Inventory Planning and Stock Control |
|
|
WIP-104 |
Effective Warehouse Operation and Inventory Management |
|
|
WIP-105 |
Export Documentation and Bill of Lading |
|
|
WIP-106 |
Integrated Purchasing, Logistics, Materials and Supply Chain Management |
|
|
WIP-107 |
Inventory and Materials Management |
|
|
WIP-108 |
Inventory Management Techniques |
|
|
WIP-109 |
Inventory, Purchasing and Stores Management |
|
|
WIP-110 |
Managing Supply Chain for Risk and Competitive Advantage |
|
|
WIP-111 |
Material Requirement Planning/Management |
|
|
WIP-112 |
Operations Management |
|
|
WIP-113 |
Shipping Document Controller |
|
|
WIP-114 |
Stores, Warehousing and Distribution Management |
|
|
WIP-117 |
Supply Chain Management and Planning |
|
|
WIP-118 |
Transport Management |
|
|
WIP-119 |
Warehouse Management |
|
|
WIP-120 |
Warehouse, Store and Stock Control Management |
|
|
WIP-121 |
Warehouse Operation, Spares and Inventory Management |
|
|
WIP-122 |
Warehouse Operation, Spares, Inventory Management, Export and Import Logistics |
|
|
WIP-127 |
Logistics and Supply Chain Management |
|
|
WIP-128 |
Effective Storekeeping Skills |
|
|
WIP-130 |
Materials and Supply Chain Management |
|
|
WIP-131 |
Logistics Management and Planning |
|
|
WIP-132 |
Advanced Logistics Management |
|
|
WIP-133 |
Integrating Logistics, Purchasing and Inventory with Suppliers |
|
|
WIP-134 |
Fundamentals of Shipping Logistics |
|
|
WIP-135 |
Shipping and Port Management |
|
|
WIP-136 |
Container Terminal Management |
|
|
WIP-137 |
Documentary Credit Role in Foreign Trade According to UCP 600 and Incoterms |
|
|
WIP-138 |
Customs Law and Regulation and Custom Clearance Formalities |
|
|
WIP-139 |
Import and Export Management, Documentation and Procedures |
|
|
WIP-140 |
Handling Cargo and Shipping Document |
|
|
WIP-141 |
Logistics and Transportation Techniques |
|
|
WIP-142 |
Cargo Traffic Management |
|
|
WIP-143 |
International Transportation Management |
|
|
WIP-144 |
Containerization Concept and Importance Role in Foreign Trade |
|
|
WIP-145 |
Managing Freight and International Transportation |
|
|
WIP-146 |
Fleet and Transport Management and Planning |
|
|
WIP-147 |
Transportation and Distribution Planning and Management |
|
|
WIP-148 |
Multimodal Transportation |
|
|
WIP-149 |
SAP Applications in Transport Management System |
|
|
WIP-150 |
Warehouse and Store Operations Management |
|
|
WIP-151 |
Advanced Warehouse Management |
|
|
WIP-152 |
Materials Handling in the Modern Warehouses |
|
|
WIP-153 |
Logistics and Warehouse Management |
|
|
WIP-154 |
Lean Warehousing Operations |
|
|
WIP-155 |
Warehouse and Distribution Center Layout |
|
|
WIP-156 |
HSE Policies and Regulations in the Warehouses |
|
|
WIP-157 |
SAP Applications in Warehouse Management |
|
|
WIP-158 |
Forecasting Techniques |
|
|
WIP-159 |
Materials Cataloguing, Specifications and Storage Planning |
|
|
WIP-160 |
SAP Applications in Material Management |
|
|
WIP-161 |
Strategic Planning of Supply Chain Facilities |
|
|
WIP-162 |
Supply Chain Management Technology |
|
|
WIP-163 |
Advanced Supply Chain Management |
|
|
WIP-164 |
Building The Lean Supply Chain Professional |
|
|
WIP-164 |
Building Capabilities for Lean Supply Chain Professionals |
|
|
WIP-165 |
Demand Driven Supply Chain Strategy |
|
|
WIP-166 |
Production, Capacity and Demand Planning |
|
|
WIP-167 |
Risk Management in Supply Chain |
|
|
WIP-168 |
Total Logistics Management |
|
|
WIP-169 |
Sustainable Traffic Management Strategies |
|
|
WIP-170 |
Transportation and Traffic Engineering |
|
|
WIP-171 |
Geographic Information Systems (GIS) Applications in Transportation |
|
|
WIP-172 |
Effective Materials Management- Spare Parts Planning |
|
|
|
Quality and Auditing |
| Ref. # |
Course Title |
Outline |
Proposal |
|
QSS-101 |
5s Lean Manufacturing Japanese Techniques and Kaizen Training |
|
|
QSS-102 |
Certified Lean Manager |
|
|
QSS-104 |
IQMS (Integrated Quality Management System) Familiarization |
|
|
QSS-105 |
IRCA Registered Internal Auditor Course - ISO 9001 |
|
|
QSS-106 |
IRCA Registered Lead Auditor Course - ISO 14001 - 2004 |
|
|
QSS-107 |
IRCA Registered Lead Auditor Course - ISO 22000 |
|
|
QSS-108 |
IRCA Registered Lead Auditor Course - ISO 9001 |
|
|
QSS-109 |
IRCA Registered Lead Auditor Course - OHSAS 18001: 2007 |
|
|
QSS-110 |
Laboratory Quality Management (ISO 17025): SOP, Preparation, Documentation and Auditing |
|
|
QSS-111 |
Maintain and Improve The Effectiveness of Quality and Environmental Management Systems - Internal Auditing |
|
|
QSS-112 |
Quality Awareness |
|
|
QSS-113 |
Six Sigma Black Belt |
|
|
QSS-114 |
Six Sigma Green Belt |
|
|
QSS-115 |
Six Sigma Yellow Belt |
|
|
QSS-116 |
SPC Analysis |
|
|
QSS-117 |
Total Quality Management (TQM) |
|
|
QSS-118 |
Fundamentals of Six Sigma |
|
|
QSS-119 |
Applied Statistics for Six Sigma |
|
|
QSS-120 |
Fundamentals of Lean Manufacturing |
|
|
QSS-121 |
Quality Assurance and Control |
|
|
QSS-122 |
Business Continuity |
|
|
QSS-123 |
Business Improvement and Quality |
|
|
QSS-124 |
Governance, Risk and Compliance (GRC) |
|
|
|
Health, Safety and Environment |
| Ref. # |
Course Title |
Outline |
Proposal |
|
HSE-101 |
Accident and Incident Investigation and Reporting |
|
|
HSE-102 |
Accident Investigation and Root Cause Analysis (RCA) |
|
|
HSE-103 |
Accident Prevention |
|
|
HSE-104 |
Accident Reporting Requirements and Offences Recognition |
|
|
HSE-105 |
Advanced H2S and Breathing Apparatus |
|
|
HSE-106 |
Advanced Hazard Identification |
|
|
HSE-107 |
Advanced Process Hazard Analysis Methods and Leadership (HAZOP, What-If, FMEA) |
|
|
HSE-108 |
Advanced Risk Management |
|
|
HSE-109 |
Advanced Safety Management |
|
|
HSE-110 |
Air Pollution Control |
|
|
HSE-111 |
Basic Hazard and Operability (HAZOP) Study |
|
|
HSE-112 |
Basic Life Support (BLS) |
|
|
HSE-114 |
Basics of Hazards Recognition |
|
|
HSE-115 |
Behavioral Safety Audit |
|
|
HSE-116 |
Behavioral Safety Management |
|
|
HSE-117 |
Chemical Hazard Communication |
|
|
HSE-118 |
Chemical Safety Techniques |
|
|
HSE-119 |
Classification of Hazardous Areas |
|
|
HSE-120 |
Compressed Gas Safety |
|
|
HSE-121 |
Confined Space Entry |
|
|
HSE-122 |
Construction Safety |
|
|
HSE-123 |
Contractor HSEM Awareness |
|
|
HSE-124 |
COSHH Training (Control of Substances Hazardous to Health) |
|
|
HSE-125 |
Crane and Forklift Safety |
|
|
HSE-126 |
Crane Inspection and Operations |
|
|
HSE-127 |
Defensive Driving |
|
|
HSE-129 |
Electrical Safety |
|
|
HSE-130 |
Emergency Management Integrated Contingency (ICP) |
|
|
HSE-131 |
Emergency Response Planning (ERP) |
|
|
HSE-132 |
Environmental Impact and Pollution Control in Oil and Gas Operations |
|
|
HSE-133 |
Environmental Risk Assessment in Process Industry |
|
|
HSE-134 |
Environmental Waste Management |
|
|
HSE-135 |
Ergonomics at Work Place Causes and Prevention |
|
|
HSE-136 |
Fall Protection |
|
|
HSE-137 |
Fire Alarm Mock-Up Drill |
|
|
HSE-138 |
Fire Fighter and Fire Rescue |
|
|
HSE-139 |
Fire Fighting and Rescue in Process (Oil, Gas and Power Plant) |
|
|
HSE-140 |
Fire Fighting and Emergency Response |
|
|
HSE-141 |
Fire Truck Operation |
|
|
HSE-142 |
General Safety |
|
|
HSE-143 |
General Safety in Process Industry |
|
|
HSE-144 |
HACCP Principles and Applications |
|
|
HSE-145 |
Handling Hazardous Materials and Chemicals |
|
|
HSE-146 |
Handling Hazardous Waste |
|
|
HSE-147 |
Hazard Analysis and Risk Management |
|
|
HSE-148 |
Hazard Communication (HAZCOM) |
|
|
HSE-149 |
Hazard Identification, Risk Assessment and Risk Control Program |
|
|
HSE-150 |
Hazard of Ammonia Handling, Storage and Shipping |
|
|
HSE-151 |
Hazardous Area Classification and Intrinsic Safety |
|
|
HSE-152 |
Hazardous Material Handling and Safety |
|
|
HSE-153 |
Hazardous Waste Management and Pollution Prevention |
|
|
HSE-154 |
HAZMAT and HAZCOM: Hazardous Materials and Chemicals |
|
|
HSE-155 |
Hazmat Applications: Petroleum Products (LPG, LNG, CNG, Propane, Hydrogen, Gasoline, Diesel and MTBE) |
|
|
HSE-156 |
Health and Safety Management |
|
|
HSE-157 |
Health, Safety and Environment (HSE) Policy |
|
|
HSE-158 |
Hearing Conservations |
|
|
HSE-159 |
Heat Stress and Sun Stroke Causes and Prevention |
|
|
HSE-160 |
High Voltage Electrical Safety |
|
|
HSE-161 |
HSE Excellence Leadership for Supervisors |
|
|
HSE-162 |
HSE Root Cause Failure Analysis (RCFA) |
|
|
HSE-163 |
HSE Tools and Techniques |
|
|
HSE-164 |
Impact of Change Management on HS&E |
|
|
HSE-165 |
Incident Controller |
|
|
HSE-166 |
Industrial Fire Warden |
|
|
HSE-167 |
Industrial Safety |
|
|
HSE-168 |
Industrial Security Principles |
|
|
HSE-169 |
Job Safety Analysis (JSA) |
|
|
HSE-171 |
Lifting and Rigging |
|
|
HSE-172 |
Loss Prevention and Safe Working Procedures |
|
|
HSE-173 |
Machine Guarding |
|
|
HSE-174 |
Material Handling and Safety |
|
|
HSE-175 |
Material Safety Data Sheet "MSDS" |
|
|
HSE-176 |
Mechanical Integrity (MI) |
|
|
HSE-177 |
Naturally Occurring Radioactive Material (NORM) |
|
|
HSE-179 |
New Hired Safety Orientation |
|
|
HSE-180 |
Occupational Health and Working Environment |
|
|
HSE-181 |
Occupational Health, Safety and Environment (HSE) |
|
|
HSE-182 |
Office and Industrial Ergonomics |
|
|
HSE-183 |
Off-The-Job Safety |
|
|
HSE-184 |
Oil Spill Management and Response |
|
|
HSE-191 |
Permit to Work System |
|
|
HSE-192 |
Personal Protective Equipment (PPE) |
|
|
HSE-193 |
Preventing Human Error |
|
|
HSE-194 |
Principles of Occupational Safety and Health |
|
|
HSE-195 |
Problem Solving Techniques In Safety |
|
|
HSE-196 |
Process Hazard Analysis (PHA) |
|
|
HSE-197 |
Process Safety Management (PSM) |
|
|
HSE-198 |
PTW (Permit To Work System) Procedures |
|
|
HSE-199 |
Quantified Risk Assessment (QRA) |
|
|
HSE-200 |
Radiation Hazard |
|
|
HSE-201 |
Rig Safety Hazards and Risk Assessment |
|
|
HSE-202 |
Risk Assessment |
|
|
HSE-203 |
Risk Assessment and Job Hazard Analysis |
|
|
HSE-204 |
Safe Isolation of Process Plant and Equipment (Lockout and Tag Out) |
|
|
HSE-205 |
Safe Lifting and Materials Handling |
|
|
HSE-206 |
Safe Scaffolding and High Rise Operations |
|
|
HSE-207 |
Safety Construction Management |
|
|
HSE-208 |
Safety Engineering and Risk Management |
|
|
HSE-209 |
Safety for Managers |
|
|
HSE-210 |
Safety in Chemical Laboratory |
|
|
HSE-211 |
Safety in Industrial Plants |
|
|
HSE-212 |
Safety Inspection and Audit |
|
|
HSE-213 |
Safety Leadership |
|
|
HSE-214 |
Safety Management and Loss Control |
|
|
HSE-215 |
Safety Management and Safety Policies |
|
|
HSE-216 |
Safety Management in Hazardous Locations |
|
|
HSE-217 |
Safety Management Techniques |
|
|
HSE-218 |
Safety Officer Qualification Program |
|
|
HSE-219 |
Safety Process in Refinery |
|
|
HSE-220 |
Safety Terms and Basics of Incident Prevention |
|
|
HSE-221 |
Scaffolding Inspection |
|
|
HSE-222 |
Self Contained Breathing Apparatus (SCBA) |
|
|
HSE-223 |
Sewage and Industrial Waste Water Treatment Technologies and Environmental Protection |
|
|
HSE-224 |
Standard First Aid |
|
|
HSE-225 |
STOP (5x5) |
|
|
HSE-226 |
Tools Safety |
|
|
HSE-227 |
Working Safely in Hazardous Area |
|
|
HSE-228 |
Workplace Safety |
|
|
HSE-229 |
Management of Change (MOC) and Pre Start-up Safety Review (PSSR) |
|
|
HSE-230 |
Waste Water and Air Pollution Control |
|
|
HSE-231 |
Industrial Hygiene |
|
|
HSE-232 |
Hazard Identification Study (HAZID) |
|
|
HSE-233 |
Corporate Environmental Management |
|
|
HSE-234 |
Environmental Impact Assessments - EIA |
|
|
HSE-235 |
Noise Generation, Effects, Control and Measurement |
|
|
HSE-236 |
Hazardous Wastes Management: Handling, Storage, Disposal, Monitoring and Reporting |
|
|
HSE-237 |
Electrical Safety Codes (ESC) |
|
|
HSE-238 |
Gas Explosion Hazards |
|
|
HSE-239 |
Industrial Waste Management |
|
|
HSE-240 |
Risk Assessment and QRA Studies |
|
|
HSE-241 |
Emergency Procedures and Response Actions |
|
|
HSE-242 |
Environmental Management System (EMS) |
|
|
HSE-243 |
Creating and Developing Safety Culture |
|
|
HSE-244 |
Sustainability Reporting |
|
|
HSE-245 |
Safety Excellence Symposium |
|
|
HSE-246 |
Gas Detection and Monitoring |
|
|
HSE-247 |
Behavioral Safety in Mining Industry |
|
|
HSE-248 |
Crisis, Disaster and Risk Management |
|
|
HSE-249 |
Hazard Identification & Risk Assessment (HIRA) |
|
|
HSE-250 |
Industrial Emissions Monitoring, Control and Regulations |
|
|
HSE-251 |
Mining Environmental Management |
|
|
HSE-252 |
Safety in Refinery & Petrochemical Plant Operation |
|
|
HSE-253 |
Optimum Use of Explosive |
|
|
HSE-254 |
Risk Assessment within Production Operations |
|
|
|
Inspection Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
I-101 |
Basic Corrosion Techniques and Monitoring |
|
|
I-102 |
Basic Metallurgy |
|
|
I-103 |
Protective Coating Inspection, Maintenance and Repair |
|
|
I-104 |
Control of Scale and Corrosion in Desalination (MSF) |
|
|
I-105 |
Corrosion and Scale in Oil Field |
|
|
I-106 |
Corrosion Engineering: Monitoring, Prevention and Control |
|
|
I-107 |
Corrosion for Non Corrosion Engineers |
|
|
I-108 |
Corrosion Fundamentals, Types, Causes, Analysis and Corrosion Failures |
|
|
I-110 |
Corrosion Inhibition: Technology, Applications, Selection, Monitoring, Performance and Troubleshooting |
|
|
I-111 |
Corrosion in Petroleum Industries |
|
|
I-112 |
Corrosion Management and Cathodic Protection |
|
|
I-113 |
Corrosion Mitigation and Cathodic Protection Application in Oil Field |
|
|
I-114 |
Engineering Aspects of Welding |
|
|
I-115 |
Fundamentals of Non Destructive Testing (NDT) |
|
|
I-116 |
Gas, Refinery and Petrochemical Industry Materials Corrosion |
|
|
I-117 |
In Service Inspection Technology- Level I |
|
|
I-118 |
In service Inspection Technology- Level II |
|
|
I-119 |
Inspection Codes and Standards |
|
|
I-120 |
International Welding Codes |
|
|
I-121 |
Introduction To Welding Engineering, Fabrication and Inspection |
|
|
I-122 |
Materials Selection and Failure Analysis |
|
|
I-123 |
Materials Selection for Process Plants (Material and Corrosion Engineering) |
|
|
I-124 |
Metallurgical Failure Analysis and Prevention |
|
|
I-126 |
Modern Cathodic Protection Systems: Design, Fabrication, Installation, Operation and Repair |
|
|
I-127 |
Modern Welding Technology: Welding, Fabrication and Inspection (AWS, ASME and API Codes) |
|
|
I-128 |
Painting, Coating and Thermal Installation |
|
|
I-129 |
Post Weld Heat Treatment (PWHT) |
|
|
I-130 |
Practical Welding Technology |
|
|
I-131 |
Water Scale Corrosion |
|
|
I-132 |
Welding, Cutting and Brazing |
|
|
I-133 |
Welding Inspection Codes (ASME- AWS-API) |
|
|
I-134 |
Welding Inspection Technology |
|
|
I-135 |
Welding Qualification (ASME IX) |
|
|
I-136 |
API 510 Pressure Vessel Inspection Code |
|
|
I-137 |
API 570 Piping Inspection Code |
|
|
I-138 |
API 653 Tank Inspection Code |
|
|
I-139 |
Inspection and Maintenance of Subsea Pipelines and Offshore Structures |
|
|
I-140 |
Pipeline Protection, Design, Construction, Installation, Operation and Maintenance |
|
|
I-142 |
Overhead Cranes Operation and Maintenance |
|
|
I-143 |
Pipeline Integrity Management |
|
|
I-144 |
Painting and Coating Applications in Oil Field |
|
|
I-145 |
Offshore Pipeline Protection, Design and Construction |
|
|
I-146 |
Material Failure Analysis Evaluation and Prevention |
|
|
I-147 |
Welding for Non-Welding Engineers |
|
|
I-148 |
Metallurgy for Non-Metallurgy Engineers |
|
|
I-149 |
Construction and Fabrication Practices for Tanks and Pressure Vessels |
|
|
I-150 |
Liquid Dye Penetrant Testing |
|
|
I-151 |
Magnetic Particle Testing |
|
|
I-152 |
Asset Integrity Management System |
|
|
I-153 |
Asset Management |
|
|
I-154 |
The Best Practices of Pipeline Pigging Operations |
|
|
I-155 |
Gas Pipeline Operations |
|
|
I-156 |
Pipeline Engineering |
|
|
I-157 |
Repair of Pressure Equipment and Piping |
|
|
I-158 |
Heat Treatment, Microstructure and Performance of Carbon and Steels |
|
|
I-159 |
Safety in Welding and Cutting Processes |
|
|
I-160 |
Inspection of Piping, Tanks, Vessels and Heat Exchangers |
|
|
I-161 |
Destructive Tests (Tension Tests, Compression, Hardness, Impact…) |
|
|
I-162 |
Types and Properties of Materials |
|
|
I-163 |
Introduction to Strength of Materials |
|
|
I-164 |
Metallography, Including Macro and Micro Examination, Weld Examination, Case Depth, Decarburization Measurement and Grain Size Measurement |
|
|
I-165 |
Cross Country Pipeline |
|
|
I-166 |
Pigging Foundation Course |
|
|
I-167 |
Manufacturing Processes |
|
|
I-168 |
Fracture Toughness |
|
|
I-169 |
Advanced Course in Cathodic Protection Specification, Design, Commissioning, Testing and Monitoring |
|
|
I-170 |
Cathodic Protection of Underground Pipelines |
|
|
I-171 |
Design and Operation of Pipeline Cathodic Protection Systems Design, Installation, Operation, Maintenance, Survey and Monitoring |
|
|
I-172 |
Corrosion Control by Chemical Treatment |
|
|
I-173 |
Corrosion Control by Materials Selection and Design |
|
|
I-174 |
Corrosion, Metallurgy, Failure Analysis and Prevention |
|
|
I-175 |
Marine Corrosion, Causes and Prevention |
|
|
I-176 |
Offshore Corrosion and Assessment |
|
|
I-177 |
Stainless Steels and Alloys: Why They Resist Corrosion and How They Fail |
|
|
I-178 |
Microbiologically Influenced Corrosion (MIC) Recognition, Mitigation and Prevention |
|
|
I-179 |
Life Predication of Corrodible Structures and Components |
|
|
I-180 |
Corrosion Control and Prevention for Military Equipment and Systems |
|
|
I-181 |
Concrete Corrosion Causes and Prevention |
|
|
I-182 |
Advanced Course in Concrete Durability |
|
|
I-183 |
Modern Techniques for Corrosion Testing and Monitoring in Concrete Structures |
|
|
I-184 |
Corrosion in Automotive Systems |
|
|
I-185 |
Corrosion Under Insulation (CUI) Detection, Mitigation and Prevention |
|
|
I-186 |
API 571 Deterioration Mechanisms |
|
|
I-187 |
API 579 Fitness for Service |
|
|
I-188 |
Hot Tapping Welding Application, Inspection, Risk Assessment and Control |
|
|
I-189 |
Mobile Cranes: Operation and Maintenance |
|
|
I-190 |
Metallurgy, Corrosion and Coatings |
|
|
I-191 |
Gap Analysis |
|
|
I-192 |
Life Extension Analysis |
|
|
I-193 |
Performance Standards |
|
|
|
Oil and Gas Management |
| Ref. # |
Course Title |
Outline |
Proposal |
|
OGM-101 |
Basics of Petroleum Economics |
|
|
OGM-102 |
Fundamentals of Crude Oil and Gas Marketing |
|
|
OGM-103 |
Fundamentals of International Petroleum Industry Joint Ventures and Alliances |
|
|
OGM-104 |
LNG Business Overview |
|
|
OGM-105 |
Management Strategies in the Oil and Petrochemical Industries |
|
|
OGM-106 |
Oil and Gas Accounting |
|
|
OGM-107 |
Oil and Gas Agreements |
|
|
OGM-108 |
Oil and Gas Business Overview |
|
|
OGM-109 |
Oil and Gas Change Management |
|
|
OGM-110 |
Oil and Gas Economic Evaluation with Risk and Uncertainty |
|
|
OGM-111 |
Oil Price Risk Management |
|
|
OGM-112 |
Introduction to Oil Industry |
|
|
OGM-113 |
Strategic Partnerships (Concession Lease, PSA, Joint Ventures, Service Contracts and other Alliances) |
|
|
OGM-114 |
Analysis and Modeling for Cost, Economics and Risk for Oil and Gas Projects |
|
|
OGM-118 |
Oil and Gas Law (Other Title: Contracts, Law, and Risk in Oil and Gas) |
|
|
OGM-119 |
Introduction to Oil and Gas Industry and Surface Facilities (O&M) Integrated Course |
|
|
OGM-120 |
Global Energy Markets and Pricing Strategy |
|
|
OGM-121 |
Mining Industry and Mining Finance Masterclass |
|
|
OGM-122 |
Leadership in the Oil, Gas and Petrochemicals Industry Masterclass |
|
|
OGM-123 |
Mini MBA for Oil, Gas, Petrochemicals and Energy Industry Professionals |
|
|
OGM-125 |
Digital Twin Simulations in Oil & Gas |
|
|
OGM-126 |
Drone for Oil & Gas |
|
|
OGM-127 |
Fundamentals of Oil and Gas Industry |
|
|
OGM-128 |
Fundamentals of Oil Refinery |
|
|
|
Cement Industry |
| Ref. # |
Course Title |
Outline |
Proposal |
|
CI-101 |
Cement Chemistry |
|
|
CI-102 |
Cement Industry Overview |
|
|
CI-103 |
Cement Milling |
|
|
CI-104 |
Cement Quality Assurance |
|
|
CI-105 |
Cement Raw Mills |
|
|
CI-106 |
Geomining in Cement Industry |
|
|
CI-107 |
Grinding Technology and Efficiency in Cement Industry |
|
|
CI-108 |
Kiln Operation and Troubleshooting |
|
|
CI-110 |
Process Control in Cement Industry |
|
|
CI-111 |
Raw Materials for Cement Industry |
|
|
CI-112 |
White Cement Manufacturing Technology and Processing |
|
|
|
Sales and Marketing |
| Ref. # |
Course Title |
Outline |
Proposal |
|
SM-101 |
Advanced Sales Management Skills |
|
|
SM-102 |
Advanced Selling Skills |
|
|
SM-103 |
Customer Care Skills |
|
|
SM-104 |
Customer Relationship Management (CRM) |
|
|
SM-105 |
Customer Satisfaction Mindset and Measure |
|
|
SM-106 |
Exceeding Customer Expectations |
|
|
SM-107 |
Improving Customer Service Skills |
|
|
SM-108 |
Marketing Communications |
|
|
SM-109 |
Marketing Strategies |
|
|
SM-110 |
Marketing Trends |
|
|
SM-111 |
Professional Selling Skills |
|
|
SM-112 |
Retail Selling Skills |
|
|
SM-113 |
Excellence in Sales Management |
|
|
SM-114 |
Social Media Marketing Techniques |
|
|
SM-115 |
Strategic Marketing Plan |
|
|
SM-116 |
Marketing Planning Essentials |
|
|
SM-117 |
Go for Real Prospect |
|
|
SM-118 |
Understand Prospects’ Needs |
|
|
SM-119 |
Closing Deals |
|
|
SM-120 |
Differentiate Based on Value |
|
|
SM-121 |
Customer Experience Management |
|
|
SM-122 |
Developing Customer Care Culture |
|
|
SM-123 |
The Ten Days MBA in Marketing |
|
|
SM-124 |
Advanced Customer Service Skills |
|
|
SM-125 |
Data-Driven Marketing and Analytics |
|
|
SM-126 |
Digital Marketing Masterclass |
|
|
|
General Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
GE-101 |
Engineering Design Codes and Standards and Data Sheets Review of (Static/Rotating Equipment and Instrument) |
|
|
GE-102 |
Reading of Piping and Instrument Drawings |
|
|
GE-103 |
Energy Modelling Guidelines |
|
|
|
Water and Waste Water Treatment Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
WE-101 |
Power Plant Water Chemistry |
|
|
WE-102 |
Demineralized Water Production and Polishing |
|
|
WE-103 |
Waste Water Effluent Treating Facilities |
|
|
WE-104 |
Water Industry Overview |
|
|
WE-105 |
Water Resource Management and Treatment Systems |
|
|
WE-106 |
Modern Water Desalination Technologies (RO Desalination) |
|
|
WE-107 |
Multi Stage Flash Desalination (MSF): Operation, Maintenance, Heat Balance, Performance, Optimization, Start-up and Troubleshooting |
|
|
WE-108 |
Water Desalination Plant: Operations, Maintenance and Troubleshooting |
|
|
WE-109 |
Water Desalination Technologies |
|
|
WE-110 |
STP And RO Operation, Troubleshooting and Preventative Maintenance |
|
|
WE-111 |
Waste Water Treatment |
|
|
WE-112 |
Waste Water Treatment in Gas, Refineries and Petrochemical Plants |
|
|
|
Data Management |
| Ref. # |
Course Title |
Outline |
Proposal |
|
DM-101 |
Basic Statistics |
|
|
DM-102 |
Power BI |
|
|
DM-103 |
Data Analysis Techniques |
|
|
DM-104 |
Statistical Communications |
|
|
DM-105 |
Big Data Analytics for Oil and Gas Operations |
|
|
DM-106 |
Big Data and Data Analytics Practitioner |
|
|
DM-107 |
Data Centre Energy Professional |
|
|
DM-108 |
Data Analytics for Drilling Optimisation |
|
|
DM-109 |
Data Center Infrastructure Management |
|
|
DM-110 |
Fundamentals of Data Analysis for Big Data |
|
|
DM-111 |
Power BI for Finance Professionals |
|
|
|
Digital Transformation |
| Ref. # |
Course Title |
Outline |
Proposal |
|
DT-101 |
Leading Transformational Change and its Impact on Agility and Sustainability |
|
|
DT-102 |
Leading your Organization's Digital Transformation |
|
|
DT-103 |
Digitalisation for Oil and Gas Industry |
|
|
DT-104 |
Future-Proofing with AI, Cybersecurity, and Cloud Computing |
|
|
DT-105 |
Applications and Insights into Robotics and IoT |
|
|
|
Artificial Intelligence |
| Ref. # |
Course Title |
Outline |
Proposal |
|
AI-101 |
Artificial Intelligence and Machine Learning |
|
|
AI-102 |
Principles and Practices of Artificial Intelligence |
|
|
AI-103 |
AI in Accounting and Finance |
|
|
AI-104 |
AI for HR Professionals |
|
|
AI-105 |
AI for Managers and Leaders |
|
|
AI-106 |
AI for Maintenance Professionals |
|
|
AI-107 |
AI in Marketing |
|
|
AI-108 |
AI in Procurement and Supply Chain Management |
|
|
AI-109 |
Artificial Intelligence and Sustainable Business Strategy |
|
|
AI-110 |
ChatGPT & Generative AI for Improving Business Innovation |
|
|
AI-111 |
Integrating Artificial Intelligence (AI) and Machine Learning with Big Data |
|
|
AI-112 |
Python for Robotics and Drone Technology |
|
|
|
Cybersecurity |
| Ref. # |
Course Title |
Outline |
Proposal |
|
CS-101 |
Introduction to Cybersecurity |
|
|
CS-102 |
Digital Forensics and Cyber Investigation |
|
|
CS-103 |
Process Control Cybersecurity |
|
|
CS-104 |
Ethical Hacker |
|
|
CS-105 |
Cybersecurity Essentials and Ethical Hacking |
|
|
CS-106 |
Cybersecurity Fundamentals and Incident Response |
|
|
|
Renewable Energy Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
RE-101 |
Photovoltaic (Solar) System Design and Application |
|
|
RE-102 |
Comprehensive Course on Clean Energy Development and Hydrogen Economy from Sustainable Ammonia Production |
|
|
RE-103 |
Hydrogen Production, Delivery Storage and Use Masterclass |
|
|
RE-104 |
Renewable Energy Sources Impact |
|
|
RE-105 |
Renewable Energy Integration Masterclass |
|
|
RE-106 |
Renewable Energy Technologies and Policy Masterclass |
|
|
RE-107 |
Mining & Resources: Critical Minerals and Rare Earth |
|
|
|
Fintech and Blockchain |
| Ref. # |
Course Title |
Outline |
Proposal |
|
FB-101 |
Comprehensive Course on Fintech and Blockchain |
|
|
FB-102 |
Introduction to Blockchain and Cryptocurrency |
|
|
|
Hospitality Management |
| Ref. # |
Course Title |
Outline |
Proposal |
|
HM-101 |
Excellence in Hospitality Management Creating Memorable Guest Experiences |
|
|
HM-102 |
Hospitality and Hotel Management |
|
|
HM-103 |
Mastering Frontline Hospitality Services Masterclass |
|
|
|
Human Capital Management |
| Ref. # |
Course Title |
Outline |
Proposal |
|
HC-101 |
Basics of Human Resources Management Skills |
|
|
HC-102 |
Best Practices for Training Coordinators |
|
|
HC-103 |
Best Practices in Performance Management |
|
|
HC-104 |
Business Driven Human Resource Development |
|
|
HC-105 |
Career Development and Succession Planning |
|
|
HC-106 |
Career Development Planning |
|
|
HC-107 |
Competency Assessment and Profiling |
|
|
HC-108 |
Competency Based Human Resources Management |
|
|
HC-109 |
Competency Based Performance Management |
|
|
HC-110 |
Competency Based Recruitment and Selection |
|
|
HC-111 |
Competency Profiling |
|
|
HC-112 |
Conducting the Perfect Performance Appraisal |
|
|
HC-113 |
HR for Non HR |
|
|
HC-114 |
HR Strategic Planning |
|
|
HC-115 |
Improving Employee Performance: Correcting, Coaching and Counseling |
|
|
HC-116 |
Interviewing Skills |
|
|
HC-117 |
Interviewing Skills and Assessment of Human Traits |
|
|
HC-118 |
Key Result Areas, Performance Appraisal System and HRM |
|
|
HC-119 |
Latest HR Professional Techniques |
|
|
HC-120 |
Manpower Organization and Succession Planning |
|
|
HC-121 |
Manpower Organization Planning |
|
|
HC-122 |
Organization and Manpower Management |
|
|
HC-123 |
Organizational Development to Meet Changing Needs |
|
|
HC-124 |
Performance Management, Appraisal and Development |
|
|
HC-125 |
Recruitment and Development Planning |
|
|
HC-126 |
Recruitment and Selection |
|
|
HC-127 |
Successful Interviewing for Recruitment and Selection |
|
|
HC-128 |
Talent and Career Management for Key Succession Plans |
|
|
HC-129 |
Training Evaluation and Measuring ROI (Return on Investment) on Training |
|
|
HC-130 |
Training Needs Analysis and Identification |
|
|
HC-131 |
Training Needs Assessment (TNA) |
|
|
HC-132 |
Writing HR Policies, Procedures and Conducting Staff Performance Appraisal |
|
|
HC-133 |
Training Coordinators' Workshop |
|
|
HC-134 |
Competency Based Development and Management Assurance |
|
|
HC-135 |
Essential Skills for the HR Professionals |
|
|
HC-136 |
Documents and Records Management Compliance |
|
|
HC-137 |
Job Monitoring and KPIs |
|
|
HC-138 |
Train the Trainer |
|
|
|
Instrumentation and Process Control Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
IP-102 |
Applying Standard Instrumentation and Control Documentations |
|
|
IP-103 |
Basic Instrumentation and Control |
|
|
IP-104 |
Compressors Anti-Surge Controller |
|
|
IP-105 |
Control Valve Sizing, Selection and Maintenance |
|
|
IP-106 |
Control Valve Technology |
|
|
IP-107 |
Control Valves and Actuators: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting and Maintenance |
|
|
IP-108 |
Control Valves Engineering |
|
|
IP-109 |
Control Valves, Actuators and Positioners |
|
|
IP-110 |
Control Valves, Actuators and Pumps: Selection, Calculation, Sizing, Applications, Operations and Diagnosis |
|
|
IP-111 |
Digital Control Systems, PLC, DCS and SCADA |
|
|
IP-112 |
Fire and Gas System: Detectors and Guard Safety Controller |
|
|
IP-113 |
Flow Measurement Techniques |
|
|
IP-114 |
Fundamentals of Instrumentation Measurement and Control Devices: Quality, Analysis and Problem Solving for Engineers |
|
|
IP-115 |
Human Machine Interface (HMI) |
|
|
IP-116 |
Safety Instrumented System (SIS) and Safety Integrity Level (SIL) |
|
|
IP-117 |
Alarm Trips and Turbine Protection |
|
|
IP-118 |
Modern Distributed Control Systems (DCS) and Process Instrumentation |
|
|
IP-119 |
Multiphase Flow Metering |
|
|
IP-120 |
New Approaches in DCS and SCADA Systems |
|
|
IP-121 |
Power Plant Control and Instrumentation |
|
|
IP-122 |
Data Communication and Fieldbus Systems |
|
|
IP-123 |
Safety Instrumentation and Emergency Shutdown Systems for Process Industries |
|
|
IP-124 |
Programmable Logic Controller (PLC): Maintenance, Troubleshooting and Commissioning |
|
|
IP-125 |
Process Control and Instrumentation |
|
|
IP-126 |
Process Instrumentation, Safeguarding and Asset Integrity Systems |
|
|
IP-127 |
Process Controller, Control Loop and Valve Tuning |
|
|
IP-129 |
SCADA (Supervisory Control and Data Acquisition) Systems |
|
|
IP-130 |
Siemens PLC |
|
|
IP-131 |
Smart Transmitters |
|
|
IP-132 |
Turbine and Compressor Controls |
|
|
IP-133 |
Ultrasonic Flow Metering for Gas and Liquid Application |
|
|
IP-134 |
Water Flow Measurement and Control Techniques |
|
|
IP-135 |
Advanced Process Measurement |
|
|
IP-136 |
Field Instrumentation Theory, Application and Troubleshooting |
|
|
IP-137 |
PLC and SCADA for Automation and Process Control |
|
|
IP-138 |
Instrument Calibration, Installation and Commissioning |
|
|
IP-139 |
Application of Instrumentation Drawings in the Process Industry |
|
|
IP-140 |
Automatic Tank Gauging System |
|
|
IP-141 |
Fault Finding in Measurement and Control |
|
|
IP-142 |
Application of Pneumatic Control Systems in Process Industry |
|
|
IP-143 |
Measurement Signal Transmission |
|
|
IP-144 |
Control Valves Types, Calibration and Testing Procedures |
|
|
IP-145 |
Sequential Control Systems |
|
|
|
Telecommunications Engineering |
| Ref. # |
Course Title |
Outline |
Proposal |
|
TE-101 |
Aeronautical Radio |
|
|
TE-102 |
Safety Radio |
|
|
TE-103 |
TETRA Radio |
|
|
TE-104 |
Radar Beacon and Radar Automatic Identification System (AIS) |
|
|
TE-105 |
Weather Monitoring System |
|
|
TE-106 |
Paging System |
|
|
TE-107 |
Public Address and General Alarm Systems |
|
|
TE-108 |
RFID and Personal Tracking System |
|
|
TE-109 |
Access Control System |
|
|
TE-110 |
Telephony Service Systems |
|
|
TE-111 |
SDH Transmission Systems |
|
|
TE-112 |
Microwave Links |
|
|
TE-113 |
Practical Fiber Optics Technology and OTDR Testing |
|
|
